Configure The Multi-Screen Settings [Multi-Screen Setup] - Panasonic WV-NF284 Network Operating Instructions

Configure the multi-screen settings [Multi-screen setup]

The cameras to be used for the multi-screen display can be registered on this page.
Refer to page 15 for descriptions of how to display images on a multi-screen.
* The following cameras are available for the multi-screen display.
WV-NF284, WV-NS202, WV-NP240 series, WV-NP1000 series, WV-NW470S series, WV-NP472, WV-NS320
series
[IP address]
Enter the IP address or the host name of the camera to
be used for the multi-screen. 4 cameras can be regis-
tered as a group and up to 2 groups (8 cameras) can be
registered.
When the HTTP port number for the camera had
been changed, enter as follows: (Example:
192.168.0.10:8080)
Number of characters for the IP address: 1 - 128
characters
Note:
When using the host name, it is necessary to config-
ure the DNS settings of the PC in use. (☞ page 39)
[Camera title]
The entered camera title will be displayed on a multi-
screen.
Number of characters for the camera title: 0 - 20
characters
26