Panasonic KX-TA824 Operating Manual page 47

PT/SLT
During a conversation
OR
*
Press HOLD or
Recall/hookswitch.
• * You may have to enter the Call Hold feature number, "20", after pressing the Recall/
hookswitch on your single line telephone (SLT), depending on the SLT Hold Mode of your
PBX. For more details, refer to "1.1.15 Call Hold" in the Feature Manual.
• Hold Mode Change (proprietary telephone [PT] only)
Pressing the HOLD button again while a call is on hold switches the status from General
Call Hold mode to Exclusive Call Hold mode, or vice versa.
• You cannot hold doorphone calls.
• If a call is not retrieved within a specified time period, you will hear a ring tone. If you
are having a conversation with another party at that time, you will hear an alarm tone. If
an outside (CO) line call is not retrieved within 30 minutes of being put on hold, it will be
automatically disconnected.
• There are 2 types of Call Hold mode. The difference between them is whether other
people can retrieve the held call (Call Hold) or not (Call Hold, Exclusive).
• An SLT user can hold either one intercom call or one outside (CO) line call at a time, while
a PT user can hold one intercom call and multiple outside (CO) line calls. To hold multiple
calls, use the Call Park feature.
Programming Manual References
[PT Programming]
• [104] SLT Hold Mode
• [111] Music on Hold
• [200] Hold Recall Time
[PC Programming]
• 9.1.2 Main [1-2]—Music on Hold
• 9.1.7 Timers [1-6]—Recall Time—Call Hold
• 9.1.11 Detail [1-10]—Single Line Telephone—Hold Mode
Feature Manual References
• 1.1.15 Call Hold
Operating Manual References
• 1.3.17 Call Hold Retrieve
• 1.3.20 Call Park
C.Tone
On-hook.
If an SLT connected in parallel with a PT makes
another call after going on-hook, the call on hold is
transferred to the called party.
1.3 Telephone Features
Operating Manual 47