Setting the Clock
Set REC/PLAY switch to
REC/PLAY switch
To change time setting
Select [CLOCK SET] from the
[SETUP] menu (→22), perform
and
.
• Clock settings will be saved for
approx. 3 months even after
battery is removed, provided
a fully-charged battery was
installed in the camera for 24
hours beforehand.
■
To set local time at travel
destination
[WORLD TIME] (→93)
●
Failure to set the date and time will cause the date/time to be improperly printed when printing
pictures at a digital photo center or when using [TEXT STAMP].
●
Year can be set between 2000 and 2099.
●
After the time has been set, the date can be printed correctly even if the date is not displayed on the
camera screen.
For the operating procedures for the DMC-ZS7 (→17)
before turning on the power.
Turn on the power
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
• The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
Playback Mode.)
Press [MENU/SET]
Press ◄► to select the items
(year, month, day, hour, minute,
display order or time display
format), and press ▲▼ to set
• To cancel → Press
• When set to [AM/PM], 0:00 midnight is AM 12:00,
and 0:00 noon is PM 12:00.
Press [MENU/SET]
Confirm the setting and press
[MENU/SET]
( The Clock is not set when the
camera is shipped.)
The power is turned on.
If the language select screen is not
displayed, proceed to step
Select either [24HRS] or [AM/
Select the
PM] for the time display format.
setting
item
Change
the values
and
settings
Select the display order for the
day, month, and year ([M/D/Y],
[D/M/Y], or [Y/M/D]).
.
• To return to the previous screen, press
Turn on the power again and check the time display.
(Time and date can be displayed by
pressing [DISPLAY] several times.)
.
.
19
VQT2R20