[Pict.adj.]/ [Stabilizer] - Panasonic Lumix DMC-ZS5 Operating Instructions Manual

For [REC] menu setting procedures (→20)
The elements that determine picture quality are set for each item and the pictures you
record are adjusted to your preferred picture quality.
■
Recording Mode:
■
Settings:
Settings content
[CONTRAST]
[SHARPNESS]
[SATURATION]
[NOISE REDUCTION]
●
If you are concerned about noise when you record a dark scene, it is recommended
to move [NOISE REDUCTION] to the plus side, or to adjust items other than [NOISE
REDUCTION] to the minus side before recording.
Automatically detects and prevents jitter.
■
Recording Mode:
■
Settings:
Settings
[OFF] Pictures deliberately taken with no jitter correction
The optimum image stabilizer is performed automatically based on the
[AUTO]
recording conditions.
Constant correction
[MODE 1]
(Monitor image stable, composition easy to determine)
Correction when shutter button is pressed
[MODE 2]
(More effective than [MODE 1])
●
Setting fixed to [MODE 2] in [SELF PORTRAIT] and [OFF] in [STARRY SKY] Scene
Modes.
●
Cases where Optical Image Stabilizer may be ineffective:
Heavy jitter, high zoom ratio (including Digital Zoom range), fast-moving objects,
indoors or in dark locations (due to low shutter speed)
●
This is fixed at [MODE 1] during motion picture recording.
[PICT.ADJ.]
Settings and effect
The difference in
brightness and
darkness in pictures
Outlines in pictures
Change of color
saturation
Noise processing
[STABILIZER]
–
Smaller
Soft
Subdued
Prioritize resolution
Effect
+
Greater
Sharp
Vivid
Reduce noise
105
VQT2R20