Crumar Seventeen Parsifal Quick Reference Manual

DISPLAY
This is the main visual feedback of the instrument.
When in home screen, it shows the sound name,
the bank number (1-8) the status and, if active, the
name of effect 1 and 2, the status of the amp
simulator and the amount of transpose.
LOCAL OFF
Press and hold this button
in order to turn on the
VOLUME
«LOCAL OFF» mode.
Main volume of
In this mode your instrument
your instrument.
does not produce sound but
it still sends MIDI.
BANK AND PRESETS SELECTION
Press the BANK button, it starts blinking and all preset buttons lit steady.
Press one of the PRESET buttons in order to select a bank number from 1 to 8.
The BANK button will now be blinking slowly.
Now select a preset from 1 to 8. The selection is complete and you
will see the new sound and bank number on the display.
If you need to select another sound from the same bank just push
the relative preset button.
EDIT BUTTON - ENTER/YES
While in the home screen, press this button
to enter the EDIT mode.
Here, using the VALUE ENCODER, you can scroll
through menu pages and change sound parameters
or settings. Once reached the page of interest,
press the button again (ENTER), the cursor appears,
then use the Encoder to change the value. Once done,
press the EXIT button to go back.
Some parameters may require a confirmation,
use this button again to confirm (YES).
Press and hold this button at any time to quickly
overwrite the current preset.
Venice Grand CFX
1 Off Off Off +0
TRANSPOSE FUNCTION
While in the home screen,
press and hold the EXIT button,
turn the VALUE encoder to select
the transpose amount.
This is shown on the main screen.
EXIT BUTTON - BACK/NO
While navigating through the menu
pages and changing parameters or
setting values, press this button
to exit the value entry mode or to
go back to the previous page,
or to exit the menu and
return to the home screen.
Press and hold this button for
transpose function.
VALUE ENCODER
When in edit mode, turn the encoder
to scroll the different pages.
Once inside the desired page,
turn the encoder to change the relative
settings.