Panasonic Lumix DMC-TS1 Operating Instructions Manual page 134

Others
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
•
The printer cannot print.
> Check the printer.
[NO BATTERY POWER REMAINS]
•
The remaining battery power is low.
> Charge the battery.
[THIS BATTERY CANNOT BE USED]
•
The battery cannot be recognized by the camera.
> Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Center.
•
The battery cannot be recognized as its terminal is dirty.
> Remove any dirt etc. from the terminal.
[BATTERY COVER OPEN]
•
Card/Battery door is opened. The camera cannot be operated while the card/battery door is
opened.
•
Close it securely making sure nothing gets caught in it.
[CHECK THAT NO SAND, HAIR, OR OTHER OBJECTS ARE ON THE DOOR SEAL.]
• Card/battery door is open.
•
The camera cannot be operated while the card/battery door is opened.
134
VQT1Z45