Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support Contact Voltage Regulator Instruction Manual MODEL: TDGC2-500VA/TDGC2-1000VA TDGC2-2000VA/TDGC2-3000VA We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 3
PRINCIPLE AND STRUCTURE Basic principle:Regulator is self-coupling transformer that circle ratio can be adjustable continually.Main axes act with brush frame when regulator brush recur to hand-wheel The circle ratio can be changed continually when slide with grind surface of coil so that output-voltage adjust from zero to max smoothly.
Input voltage Output voltage Max.output Model current(A) (KVA) (V) (V) TDGC2-500VA 0-130 TDGC2-1000VA 0-130 TDGC2-2000VA 0-130 TDGC2-3000VA 0-130 Warning:The maximum current at the output must not exceed the maximum current indicated in the appeal table, otherwise the device will be damaged.
SERVICE CONDITIONS The average ambient temperature is +40 degrees Celsius to -15 degrees Celsius. The pressure regulator should not be installed more than 1000m above sea level, 90% relative humidity of the air. The power supply voltage wave type is a sine wave. It should be used in an environment free of explosive and corrosive substances such as gas, smoke, chemical dirt, and dust discharge.
fuse of the device and replace the current fuse in the device with the fuse attached in the package. CARE AND MAINTENANCE During the normal operation, the regulator should be checked regularly by charcoal brush and make sure that the brush and contact parts won't be more than the wide of two wires.
Page 7
Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai EC REP: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany Tel: +49 1727041930 euvertreter@gmail.com UK REP: Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom Tel: 01772418127 pooledas123@gmail.com Imported to AUS: SIHAO PTY LTD.
Page 8
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the TDGC2-500VA and is the answer not in the manual?
Questions and answers