Optical Image Stabilizer Function - Panasonic HDC-SD600K Operating Instructions Manual

Advanced
2
Recording
(Advanced)
Optical image stabilizer can stabilize the image without decreasing the image quality as
much.
¬ Change the mode to
∫ Changing the optical image stabilizer function when in still picture
recording mode
: [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2]
[MODE1]:
The function works all the time.
[MODE2]:
The function works when the
yourself or recording with a tripod in still picture recording mode.
≥ When in [MODE1],
≥ Stabilization may not be possible under strong shaking conditions.
Optical image stabilizer
function
or .
Optical image stabilizer button
O.I.S.
Pressing the button changes the optical
image stabilizer setting.
(Motion picture recording mode)
(Still picture recording mode)
≥ Switch to manual mode before setting the
Optical Image Stabilizer function to off.
: Active mode
This setting gives more stabilization and is
suitable for recording when walking.
: ON
This setting is suitable for recording in a stable
state such as scenery. We recommend recording
with a tripod in motion picture recording mode.
button is pressed. We recommend you are recording
/ appears. When in [MODE2],
# # OFF
/ # / # OFF
/ appears.
(ENG) VQT2U80
29