Black Balance Adjustment; Gen-Lock Adjustment - Panasonic AK-HC1500 Operating Instructions Manual

How to adjust
Black balance adjustment
 Adjust it with the lens closed.
When the motor drive lens is controlled from the camera, adjusting the black balance
causes the lens to be automatically closed.
Gen-lock adjustment
When multiple cameras are used or the camera is combined with other equipment, it is
necessary to adjust the phase for phase matching by external synchronization.
 Horizontal phase adjustment
Observe the waveforms of externally synchronizing signal input (black burst signal) and
video signal output by a two-phenomenon oscilloscope, and make the horizontal phase
according to the camera menu.
Adjustment with GEN-LOCK of SETTING menu
When HD synchronizing signals are input:
 Roughly adjust the synchronizing signal input and video signal output phases by
H PHASE-COARSE.
 Finely adjust the synchronizing signal input and video signal output phases by
H PHASE-FINE.
�� ��
GEN-LOCK
GEN-LOCK INPUT
H PHASE-COARSE
H PHASE-FINE
When SD synchronizing signals are input:
 Roughly adjust the synchronizing signal input and video signal output phases by
SD-HD PHASE-COARSE.
 Finely adjust the synchronizing signal input and video signal output phases by
SD-HD PHASE-FINE. If the adjustment performed using SD-HD PHASE is not
satisfactory, use H PHASE-COARSE/FINE.
���� ��
GEN-LOCK
GEN-LOCK INPUT
H PHASE-COARSE
H PHASE-FINE
SD HD PHASE CRS
SD HD PHASE FINE
:BNC
:+00
:+000
:BNC
:+00
:+000
:+0
:+00
- 18 (E) -