Optoma TW766W User Manual page 45

(*) It is advised to
write down the
values currently
set on your
computer before
making any
changes.
Accessing Projector with web browser
TM
(eg. Microsoft Internet Explorer)
) Make sure your PC connects to the Wireless Projector
successfully.
2) Open your browser, it will load the Wireless Projector home page
automatically.
3) If not, enter the projector's IP address in the browser. This can be
found on the projectors wireless start-up screen or in the OSD.
(The default IP is 92.68.00.0)
4) Click [Admin] and then enter password.
NB. The password default value is "admin".
5) Click on [Projector control Panel] to access the projector controls.
Advanced Wireless Features
For instructions on how to use these features, please refer to the
"Wireless / Networking User manual" (On User Manual CD).
If you have a problems accessing projector controls
via the Network connection.
1) Follow steps 1 ~ 3 for DHCP OFF as shown on Page 44.(*)
2) On your computer, click Start, click Control Panel, click Network
and Internet Connections, click Network Connections, click the
network connection you want to confi gure (this would be your
network card), click Properties, click Internet Protocol and click on
Properties.
User Controls
45
English