Power Consumption - Ruijie Reyee RG-EW6000GX PRO User Manual

Then, repeat the router setup process.
What should I do if I am unable to access the Internet after setting up my router?
(1) Check the network cable connection. Make sure that the network cable is connected
properly as indicated in the "Setting Up One Router" section. Verify that the system LED is on
to ensure proper connectivity.
(2) Check the "Internet access mode" on the router's Internet connection settings page.
If your Internet service provider (ISP) has provided you with a broadband account password,
then select "Dial-up" as the Internet access mode, and use the account and password for
Internet access. If you have been provided with an IP address, subnet mask, gateway, and
DNS server information from your ISP, then select "Static IP" for your Internet access mode,
and enter the required parameters for Internet access.
If the issue persists after attempting the above steps, please contact your ISP.
What should I do if I forgot the management password of the router?
Enter the correct Wi-Fi password. If the issue persists, restore the router to factory settings.
How can I restore the router to factory settings?
Press and hold the reset button of the router with a needle-shaped object for more than 10
seconds, and then release the button after the system LED blinks fast. After the system LED of
the router is steady on, and the router broadcast the SSID"@ Ruijie sXXXX", the router is
restored to factory settings.

Power Consumption

This router complies with European Commission (EC) Regulations No.
1275/2008 and No. 801/2013.
1. How to turn on or off Wi-Fi: Log in to the Eweb management system of the router, choose
More > Advanced > Wi-Fi Switch, and click Wi-Fi Switch to turn Wi-Fi on or off.
2. Standby power: < 8 W
3. Default time for power management: This router enters the standby mode when there is no
data transmission.
4. Unplug the power cord from the wall outlet if the router will not be used for an extended
period of time.
5. For relevant information in the product manual, visit https://www.ruijienetworks.com/products.
Use only power supplies listed in the user instructions.
Power supply manufacturer: Chenzhou Frecom Electronics Co.. Ltd.
Model: F36L7-120300SPACP
Input: 100-240VAC, 50/60Hz, 0.9A
Output: 12VDC, 3.0A, 36.0W