RG-EW6000GX PRO User Manual RG-EW6000GX PRO Router Reset button Power socket 2.5GE port (WAN/LAN) ❶ ❷ ❸ 1GE port (WAN/LAN) 1GE LAN port E-sports port ❹ ❺ ❻ Nameplate (at the bottom) ❼ Reyee Mesh/Game turbo button ❽ Status Description Press the button This device serves as the primary router, and starts mesh for less than 2...
SSID broadcast by cable. power source. the router: @Ruijie-sXXXX. The configuration page will pop up. Then, complete the settings as prompted. *If the configuration page does not pop up, you can log in to the Eweb management system of the router by...
Page 6
Setting Up Multiple Routers for Wireless Reyee Mesh Networking 1. Connect the first router to the Internet, and configure it as the primary router. See the “Setting Up One Router” section above for the configuration steps. Reyee Mesh/Game turbo Restroom Kitchen Dining Bedro...
Page 7
steady on. The SSID and password of the secondary router are automatically synchronized with those of the primary router. 4. Place the secondary router in a location where the Wi-Fi signal needs to be extended, and power it on. After the secondary router is powered on, there is no need to configure it. You can access the Internet after the system LED of the secondary router is steady on.
Press and hold the reset button of the router with a needle-shaped object for more than 10 seconds, and then release the button after the system LED blinks fast. After the system LED of the router is steady on, and the router broadcast the SSID“@ Ruijie sXXXX”, the router is restored to factory settings.
Page 10
Safety Information •Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. •Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. •Avoid dusty, damp, or dirty environments.
Need help?
Do you have a question about the Reyee RG-EW6000GX PRO and is the answer not in the manual?
Questions and answers