Using Timer Functions; Alarm Feature - Onkyo NC-500 Instruction Manual

Audio network receiver

Hide thumbs Also See for NC-500:

Table of Contents

Using timer functions

The following flow chart presents the setup menu screens you navigate through when setting up the

clock and alarm:

Set

Alarm

Set

Alarm

Alarm Settings

When the set time is reached, the NC-500 will be

turned on and start playing audio from the

specified input source. The alarm feature works

in standby power mode only. Once you have

configured the settings, switch to standby power

mode.

1. Activate menu mode.

Press the SETUP button to display the setup

items in the display area.

2. Press the SELECT button.

3. Press the Cursor / button to display

"Set Alarm" in the display area.

Press the SELECT button.

4. Set the alarm start time and alarm

source.

For details, see "Setting the alarm start time"

and "Setting the alarm source" on page 47.

5. Press the STANDBY/ON button to

allow the NC-500 to enter the standby

mode.

While the NC-500 is turned on, the alarm

function will not be activated.

The clock display while the

timer function is set

Table of Contents