IBM Enhanced Graphics Adapter Installation Instructions Manual page 5

If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
e Reorient the receiving antenna.
e Relocate the equipment with respect to the receiver.
e Move the equipment away from the receiver.
e Plug the equipment into a different outlet so that equipment
and receiver are on different branch circuits.
e Ensure that card mounting screws, attachment connector
screws, and ground wires are tightly secured.
e Ensure that card slot covers are in place when no card is
installed.
¢ If peripherals not offered by IBM are used with this
equipment, it is suggested that you use shielded, grounded
cables with in-line filters, if necessary.
If necessary consult your dealer service representative for
additional suggestions. |
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. It is the responsibility of the user to correct such
interference.
August 2, 1984 v
=)
)
a")
|
>
=~
"