Protecting Images K Preventing Accidental Erasure; Single-Frame Protect; Protecting Selected Frames; Canceling All Protections - Olympus EVOLT E-510 Instruction Manual

Protecting images k Preventing accidental erasure

Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.

Single-frame protect

Play back the image you want to protect and press the
0 (protect) button.
• 9 (protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the 0
button.
4

Protecting selected frames

This function lets you protect selected images at one time during single-frame playback or
index display.
1
Display the images you want to protect and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
• During index display, press p to select the images you want to protect and press the i
button.
2
Press p to display the next images you want to protect and press the
i button.
3
After you have selected the images to protect, press the 0 (protect)
button.

Canceling all protections

This function lets you cancel the protection of several images at one time.
1
MENU [q] [RESET PROTECT]
2
Use ac to select [YES], then press i.
• Formatting the card erases all images even if they have been protected. g "Formatting the
card" (P. 107)
• Protected images cannot be rotated even when the F button is pressed.
72
EN
x Notes
0 button
i button