PARTS DIAGRAM ASSEMBLY INSTRUCTIONS 1. Remove all contents from carton. 2. Open frame and place up-side-down on the floor. Attach legs without brakes to the front of the walker by depressing push pin and sliding leg into the receptacle. Secure in place using the tightening knob, threading the knob in from the outside.
SAFETY PRECAUTIONS 1. Please make sure the Rollator is fully opened, seat is down and the folding bar under seat is locked in the down position. 2. Be sure that both knobs are fully tightened and are at equal heights. Test Rollator for stability before applying full weight to hand grips.
HEIGHT ADJUSTMENT The height of the rollator can be adjusted in two ways to accomodate many different users. HANDLE HEIGHT ADJUSTMENT 1. Remove tightening knob from handle. 2. Set handle to desired height. 3. Replace tightening knob into handle, making sure to insert knob from the outside.
Prior authorization is required for walkers returned to Rhythm Healthcare. All Rhythm Healthcare products are identified by a lot number at the time of manufacture. Removing or defacing the lot number may void this warranty. If you have questions about your rollator or this warranty, please call (877) 843-6464.
Need help?
Do you have a question about the 807ADJBK and is the answer not in the manual?
Questions and answers