NETGEAR.com/support
community.NETGEAR.com
NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD Floor 6, Penrose Two, Penrose Dock,
Cork, T23 YY09, Ireland
© NETGEAR, Inc., NETGEAR, the NETGEAR Logo and the Nighthawk logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used
for reference purposes only.
July 2024
For detailed instructions on alternative setup
methods like fixed installation and enterprise
deployment with NETGEAR Insight, scan the QR
code or visit NETGEAR.com/m7usermanual.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document
en français canadien à NETGEAR.com/support/download. (If this product
is sold in Canada, you can access this document in Canadian French at
NETGEAR.com/support/download.)
For regulatory compliance information including the EU Declaration of
Conformity, visit NETGEAR.com/about/regulatory. See the regulatory
compliance document before connecting the power supply. For
NETGEAR's Privacy Policy, visit NETGEAR.com/about/privacy-policy. By
using this device, you are agreeing to NETGEAR's Terms and Conditions at
NETGEAR.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Applicable to 6 GHz devices only: Only use the device indoors. The
operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats,
and aircraft, except that operation of this device is permitted in large aircraft
while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125
GHz band is prohibited for control of or communications with unmanned
aircraft systems.
QUICK START
5G MOBILE WIFI ROUTER
Need help?
Do you have a question about the NIGHTHAWK M7 ULTRA and is the answer not in the manual?
Questions and answers
Device not showing in available networks
The NETGEAR Nighthawk M7 Ultra may not show in available networks if it is not powered on. To power it on, press and hold the Power/home button for two seconds. Additionally, ensure the battery and SIM card are correctly installed, and check that the device is set up properly by visiting http://192.168.1.1 from a connected device.
This answer is automatically generated