Page 1
Tumble dryer WQ33G2DEFG User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
Refer to the Digital User Guide for more information. Table of contents 1 Safety........4 9 Programs ........ 24 1.1 General instructions ..... 4 9.1 Automatic programs ..24 1.2 Destination of the device 9.2 Time programs........25 comb ..........4 10 Accessories......
Page 3
16 Troubleshooting ....38 17 Transport, storage and disposal........42 17.1 Preparing the device for transport ........ 42 17.2 Disposal of your old device ..........42 18 Service........43 18.1 Product number (E no.) and production number (FD) ... 43 19 Consumption values ....
Safety 1 Safety Please observe the following safety precautions. 1.1 General instructions ¡Read these instructions for use carefully. ¡Keep the instructions for use and product information for later for use or for subsequent owners. ¡Do not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: ¡for dryer-suitable and water-washed textiles...
Safety 1.4 Safe installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and use the device according to the information on the rating plate. ▶ Only connect the device to an alternating current mains via a properly installed earthed socket.
Page 6
Safety WARNING ‒ Risk of fire! Using an extended power cord and unauthorized adapters is dangerous. ▶ Do not use extension cords or multiple sockets. ▶ If the power cord is too short, contact customer service. ▶ Use only adapters approved by the manufacturer. WARNING ‒...
Safety ▶ Level the device using the device feet and a spirit level. There is a risk of tripping if hoses and mains connection cables are not properly laid. ▶ Lay the hoses and connecting cables in such a way that people cannot trip over them.
Page 8
Safety WARNING ‒ Risk of health hazard! Children could become trapped in the device and endanger their lives. ▶ Do not place the appliance behind a door that blocks or prevents the appliance door from opening. ▶ On discarded appliances, unplug the power cord from the socket, then cut the power cord and damage the appliance door lock in such a way that the appliance door no longer closes.
Page 9
Safety WARNING ‒ Risk of fire! The refrigerant R290 in this device is environmentally friendly but flammable and can ignite upon contact with open flames or ignition sources. ▶ Open flames and other ignition sources away from it keep the device. WARNING ‒...
Safety The appliance may tip over when sitting or leaning on the open door. ▶ Do not sit or lean on the appliance door. ▶ Do not place objects on the appliance door. Reaching into the rotating drum can cause injury to the hands. ▶...
Avoid material damage Foam or foam rubber can deform or 2 Material damage melt when drying. avoid Do not dry laundry containing ▶ foam or foam rubber. Follow these instructions to avoid Unsuitable cleaning agents can material damage and damage to the damage the surfaces of the device.
Set up and connect Spin the laundry in the washing 4 Setup and connection machine before drying. aMoist laundry extends the program duration and increases 4.1 Unpacking the device energy consumption. Observe the maximum load of the Objects left in the drum that are not programs.
Set up and connect Description Delivery scope Staging location To demand catch The device al- In a laundry borrow with the Tumble dryer drying column original connecting set of the dro- ger manufacturer a washer-dryer set up a column. → "Accessories", Accompanying documents Page 27...
Set up and connect 4.4 Adjusting the device To reduce noise and vibration, place the device horizontally. To adjust the device, turn the device ▶ feet. Check the horizontal adjustment of the device with a spirit level. All device feet must be firmly on the ground.
Get to know your device 5 Get to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the image may differ, e.g. the color and the shape. Door Air intake Bottom service flap...
Get to know your device 5.2 Control panel You can use the control panel to set all functions of your device and obtain information about its operating status. Programs → Page 24 Program selector → Page 28 Display → Page 17 Buttons →...
Display 6 Display The display shows the current setting values, selection options or information texts. Example display indication Description Indication Designation 0:40 Approximate expected program duration Program duration / remaining time of or time remaining in the program. the program 0:00 Time program Time program is set.
Page 18
Display Description Indication Designation The drying target is activated. Drying purpose cupboard - → "Buttons", page 21 The drying target is activated. Drying purpose cupboard - → "Buttons", page 20 dry Plus Drying target The custom drying target is activated. →...
Page 19
Display Description Indication Designation Pause Program status Program end Program status Example...
Buttons 7 Buttons Here you will find an overview of the buttons and their setting options. Knob Description Choice Start/Pause ¡start Start program, an- null or pause. ¡Cancel ¡pause ¡activate Activate or deactivate the child lock. ¡deactivate The control panels secured against accidental operation.
Page 21
Buttons Knob Description Choice ¡Cupboard dry ¡With the Cabinet selection Cupboard dry ¡ +1 dry, the drying target is activated. ¡ +2 ¡ +3 The drying target lays determine how damp or dry the laundry is at the end of the program →...
Page 22
Buttons Knob Description Choice Dry gently ¡activate Activate gentle drying or deactivate. ¡deactivate The temperature becomes reduced for sensitive textiles, e.g. for polyacrylic or elastane. The program duration is extended. ¡Program end ¡The program end Ready in ¡Program duration to establish. The program duration is already included in the set number of...
Drying purpose 8 Drying purpose A drying target is specified for each automatic program. The drying target determines how dry or damp your laundry is at the end of the program. Laundry Drying result Drying purpose The laundry is dry. Multi-layered thick laundry Cupboard dry plus...
Programs 9 Programs You can dry your textiles either with an automatic program or a timed programme. 9.1 Automatic programs Tips Automatic programs in which moisture sensors measure the ¡Select the drying target according residual moisture of the laundry dry the textile or the desired during drying.
Programs Program Description Max. bela- thing (kg) Dry waterproof and outdoor clothing with Outdoor a membrane layer and water-repellent textiles. Pillow Dry a pillow with down filling or synthetic fibers. pillow Remark:To distribute the filling and remove moisture accumulation, fluff the pillows after the end of the program.
Page 26
Programs Time program Description Max. bela- thing (kg) Time program warm Dry all textiles except wool and silk. Suitable for pre-dried or slightly damp laundry and for post-drying multi-layered, thicker laundry.
The device higher WZDP20D places so that it is easily filled and can be emptied. 11 Laundry Remark:You can find more information in the digital instructions for use by scanning the QR code in the table of contents or at www.siemens-home.bsh-group.com.
Remark:If you want to change the time for use by scanning the QR code in until the program end, first set the the table of contents or at ready in time. www.siemens-home.bsh-group.com. OnStart/Pauseto press. ▶...
Service 12.9 Fluff filter aThe display shows whether the program maduur or the ready in time During drying, the fluff from the displayed. laundry is collected in the fluff filter. aAfter the end of the program it shows The fluff filter protects the device display: "End".
Page 30
Service Remove the two-piece fluff filter. Open both fluff filters. Remove the fluff. Remove the fluff from the recess. Clean both fluff filters thoroughly with running, warm water and dry. Make sure that no lint falls into the air duct. Remove the two-piece fluff filter.
Service Close both fluff filters and put them Cleaning each time after drying is together. not required. ¡If you do not use the device as intended, cleaning writing, the device function may be impaired. Required:The display shows during use: . Clean the fluff filter →...
Service Clean the filter mat thoroughly with 12.11 Condensation water tank running, warm water and press Condensation water is formed during out by hand. drying, which your appliance uses for automatic cleaning. The condensation water is collected at the factory in the condensation water tank of the device.
14 Basic settings You can set the basic settings of your device according to your wishes. Remark:You can find more information in the digital instructions for use by scanning the QR code in the table of contents or at www.siemens-home.bsh-group.com.
Remark:You can find more information in the digital instructions for use by scanning the QR code in the table of contents or at www.siemens-home.bsh-group.com. If you place a cloth under the service 15.1 Tips for cleaning and flap, you can collect the residual maintenance water from the bottom unit.
Page 35
Cleaning and maintenance Pull out the insert horizontally. CAREFULLY Risk of cutting! Sharp edges on the heat exchanger can cause cuts if touched. Do not touch the fins of the heat ▶ exchanger. Open the base unit → Page 34 . Clean the heat exchanger cover with a soft brush.
Page 36
Cleaning and maintenance Carefully clean the air inlet grille with Close bottom unit the brush attachment of a vacuum Required:The bottom unit is open. cleaner. → "Opening the bottom unit", page 34 Place the heat exchanger cover on the handle. Make sure that the grille is not deformed or damaged.
Cleaning and maintenance 15.3 Humidity sensor The humidity sensor of this appliance determines how damp your laundry is during drying. Depending on the residual moisture of the laundry, the appliance changes the duration of the automatic program. Clean humidity sensor Over time, residues of lime, detergents and care products can deposit on the humidity sensor.
Troubleshooting 16 Troubleshooting You can resolve minor faults with the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶...
Page 39
Troubleshooting Cause and troubleshooting Malfunction Device pauses, Cooling process active. but the drum No error - no action necessary. ▶ turns. Wrinkling. The loading quantity is too high. Please note the maximum loading quantity of the ▶ → "Programs", page 24 The laundry has been left in the drum for too long after drying.
Page 40
Troubleshooting Cause and troubleshooting Malfunction The program sequence is optimized electronically. This The program duration changes during may lead to changes in the program duration. drying. No error - no action necessary. ▶ Pump noise. Condensation water pump active. No error - normal operating noise. ▶...
Page 41
Troubleshooting Cause and troubleshooting Malfunction Make sure the heat exchanger cover handle is closed ▶ Water is leaking. correctly. → "Close bottom unit", page 36 Laundry is too damp. Unsuitable program set for the textile type. Set a time program for final drying. ▶...
Transport, store and dispose of Disconnect the plug of the device 17 Transport, storage from the mains. beat and remove aThe device is ready for trans- port wine. Here you will receive an explanation 17.2 Disposal of your old of how to prepare the device for transport and storage.
Service department When you contact the service You can obtain information about department, you will need the current disposal methods from your product number (E-Nr.) and the dealer and your municipal or district production number (FD) of the device. council office. The contact details of the service This device is marked department can be found in the supplied...
Consumption values 19 Consumption values The programCotton eco (indicated by The actual values may deviate from "arrow") is suitable for drying cotton the stated values depending on the laundry with normal humidity and type of textiles, the composition of the from the point of view of the laundry to be dried, residual moisture combined energy consumption for...
Technical data End- Out- Pro- Program Bela- Centri- Ener- gang gram- giever- fugue thing moisture (kg) speed maduur tidiness moisture (h:min) (kWh/ tidiness number (t/ min) cycle) 12.0 1:36 0.75 Cotton + Iron dry 0:57 0.42 Wrinkle resistant + Cupboard dry 1:08 0.52 Wrinkle resistant +...
Page 48
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark license of Siemens AG *9001713951* 9001713951 (020210)
Need help?
Do you have a question about the WQ33G2DEFG and is the answer not in the manual?
Questions and answers