Usb Data Cable - Nokia Luna User Manual

Synchronize from a compatible PC
Before you synchronize data from calendar, notes, and contacts from a compatible PC, you
must install the Nokia PC Suite software of your phone on the PC. Use Bluetooth wireless
technology or a USB data cable for the synchronization, and start the synchronization from
the PC.
Synchronize from a server
To use a remote internet server, you must subscribe to a synchronization service. For more
information and the settings required for this service, contact your service provider. You may
receive the settings as a configuration message. See "Configuration settings service," p. 9
and "Configuration," p. 57.
If you have saved data on the remote internet server, to synchronize your phone, start the
synchronization from your phone.
Select Menu > Settings > Connectivity > Data transfer > Server synchronization.
Depending on the settings, select Initializing synchronization or Initializing copy.
Synchronizing for the first time or after an interrupted synchronization may take up to 30
minutes to complete, if the contacts or calendar are full.

USB data cable

You can use the CA-101 USB data cable to transfer data between the phone and a compatible
PC with Nokia PC Suite. To activate the phone for data transfer, connect the data cable to the
phone and PC. See "Charge the battery with the CA-101 data cable," p. 13 for more
information on connecting the data cable. The phone detects the data cable automatically.
■ Call
Select Menu > Settings > Call and from the following options:
Call forwarding—to divert your incoming calls (network service). You may not be able to divert
your calls if some call restriction functions are active. See Call restrictions in "Security," p. 57.
Anykey answer > On—to answer an incoming call by briefly pressing any key, except the
power key, the camera key, the left and right selection keys, or the end key
Slide call handling > Open slide to answer calls—to answer an incoming call by opening the slide
Automatic redial > On—to make a maximum of 10 attempts to connect the call after an
unsuccessful call attempt
1-touch dialing > On—to dial the names and phone numbers assigned to the 1-touch dialing
keys, 2 to 9, by pressing and holding the corresponding number key
Call waiting > Activate—to have the network notify you of an incoming call while you have a
call in progress (network service). See "Call waiting," p. 21.
Summary after call > On—to briefly display the approximate duration and cost (network service)
of the call after each call
55