To Create Contact Groups - Nokia 9210 Owner's Manual

78
If you need a phone number-DTMF combination number for a contact, store the
phone number followed by the DTMF sequence in the
following non-numeric characters:
Character
*
#
p
w

To create contact groups

You can create contact groups to save time by sending e-mails and short messages
to all members of the contact group in one action.
1 With the Contacts directory main view displayed, press the Menu key and select
File > New
2 Enter a name for your group.
3 To add contacts to the group, press
groups opens.
4 Select a contact and press Add. Note that you can add another contact group
to a group.
5 To attach a picture for the group, press > on the Arrows key to move to the
picture frame. Alternatively, press the Menu key and select
A dialog displaying the contents of the default folder opens. Select a file and
press OK, or press
6 To save the group contact card, press Done.
An example of a contact group with members is shown in Figure 33.
Figure 33
Function
The asterisk and hash symbols may be used if the DTMF service
requires them
Inserts a pause of approx. 2 seconds before, or between, DTMF
characters
If you use this character, the remaining sequence is not sent un-
til you press Send tone
group.... A blank group contact card opens.
Browse to search for a picture file.
Copyright © 2004 Nokia. All rights reserved.
Tel field. You can use the
again during the call.
Add member. A list of contact cards and
Group > Insert picture.