Nokia 9210 Owner's Manual page 124

124
Full template: The header field of the fax will have more information about the
sender and recipient of the fax, the date of the fax and a separate
You can save and use customised cover templates in the Templates folder using File
manager; for more information see page 151. Whatever cover template you use, the
available recipient information is filled in automatically.
To receive and read faxes
Tip: To forward a received fax, press the Menu key and select
Faxes are received automatically, provided that this service is available and that the
phone is turned on and within network coverage.
When a new fax is received, you hear a tone - unless the system is set to a silent
profile - and an information note is shown on the display.
Tip: You can zoom and rotate in the fax viewer. Each press of
fax 90 degrees clockwise.
To open a fax received earlier, go to the Inbox, select the fax and press Open.
Note: If a fax is not received completely due to some failure, it is named
Incomplete
To select and save all or part of a received fax
You can select all or part of a fax and save it in another format for further editing.
To select an area of a fax page
1 Press the Menu key in the fax viewer and select
selection frame appears in the fax viewer.
2 Use arrow keys to move the selection frame to the upper-left corner of the area
you want to select.
3 To change the size of the selection frame, press and hold the Ctrl key and press
the Arrows key. To cancel the selection, press the Menu key and select
Selection frame
To save fax in another format
1 Press the Menu key in the fax viewer and select
to be exported. The options are
defined. Press OK. A dialog opens.
2 Specify the name and location of the new document. To change the format of
the new document, press Change format.
3 Press OK
fax.
again, or just press Esc key.
to save the exported fax file.
Copyright © 2004 Nokia. All rights reserved.
Tools
File
Whole document / Current page
Remarks:
File > Forward.
Rotate rotates the
> Selection frame. A
> Export.... Select the range
/ Selected
field.
Tools >
/ User