Af-Assist Illuminator - Nikon CoolPix P7100 Reference Manual

Option
Vibration reduction
Motion detection
AF assist
Red-eye reduction
Digital zoom
Reduce blurring caused by camera shake when
shooting. The default setting is On.
• When using a tripod to stabilize the camera, set this
feature to Off to prevent this feature from
malfunctioning.
When the camera detects camera shake or subject
movement at the time of shooting, it automatically
increases ISO sensitivity and shutter speed to reduce
blurring. The default setting is Off.
The r indicator lights in green when the camera
detects camera shake and increases shutter speed.
• When using certain shooting modes or settings,
motion is not detected. In this case the r indicator is
not displayed.
When set to Auto (default setting), the AF-assist
illuminator (A33) lights when shooting in dark
surroundings to help the camera focus.
• The illuminator has a range of about 8.0 m (26 ft) at
the maximum wide-angle position and about 7.0 m
(22 ft) at the maximum telephoto position.
• Even if Auto is selected, the AF-assist illuminator may
not light depending on the position of the focus area
or the scene mode that is selected.
When the flash mode (A61) is set to V (auto with
red-eye reduction) and this feature is set to Pre-flash
on (default setting), the flash repeatedly fires pre-
flashes at low intensity before the main flash to reduce
the red-eye effect, and it then performs the red-eye
reduction process using picture compensation.
When set to On (default setting), when the optical
zoom is at the maximum telephoto zoom position,
rotating and holding the zoom control toward g (i)
triggers the digital zoom (A31).
When set to Crop, the digital zoom is limited to the
range (to the zoom position V) at which image quality
of the shot still picture does not deteriorate (except
when recording a movie).
• The digital zoom cannot be used simultaneously in
certain settings such as the shooting mode.
Description
The Setup Menu
A
E76
E77
E78
E78
E79
105