Specifications - NAD M3 Owner's Manual

Reference

SPECIFICATIONS

18
PRE-AMP SECTION
Line level inputs
Input impedance (R+C)
Balanced Input impedance (R+C)
Input sensitivity, rated power
Frequency response (5Hz - 70kHz)
LINE LEVEL OUTPUTS
Output impedance
Tape
Signal/noise ratio
TONE CONTROLS
Bass
Treble
Spectral Tilt
+12VOLT TRIGGER OUT
Output Voltage
Minimum Output Current
Maximum Short Circuit Current
POWER AMP SECTION
Continuous output power into 4/8Ω
Rated Distortion (THD 20Hz - 20kHz)
Clipping power
3
IHF dynamic headroom at 8Ω
IHF dynamic power at 8Ω
IHF dynamic power at 4Ω
IHF dynamic power at 2Ω
Damping factor (ref. 8Ω, 50Hz)
Input impedance
Input Sensitivity (for rated power into 8Ω)
Voltage gain
Frequency response; 20Hz-20kHz
Frequency response; at > 80kHz
Signal/noise ratio; ref 1W
Signal/noise ratio; ref rated power
PHYSICAL SPECIFICATIONS
Dimensions (W x H x D):
Net:
Gross: 4
Net Weight
Shipping Weight
1
From CD input to speakers output, volume setting for 500mV in, 8Ω 1W out
2
Minimum power per channel, 20Hz - 20kHz, both channels driven with no more than rated distortion.
3
Maximum continuous power per channel 4Ω and 8Ω
4
Gross dimensions include feet, volume knob and extended speaker terminals.
Specifications are subject to change without notice. For updated documentation and features please log onto www.nadelectronics.com
for the latest information about your M3.
1
Source Z + 1kΩ
>110dB (AWTD)
+12V +/- 20%
2 180W (23dBW)
220W (23.4dbW)
300W (24.7dBW)
520W (27.2dBW)
700W (28.4dBW)
>107dB (AWTD)
17.2 x 5.2 x 15.2"(435 x 133 x 386mm)
17.2 x 5.8 x 17.2"(435 x 147 x 435mm)
51.8 lbs (23.5 kg)
68.3 lbs (31.0kg)
150kΩ/500pF
120kΩ/100pF
446mV
<+/-0.3dB
100Ω
±5dB
±5dB
±3dB
>40mA
<60mA
0.004%
3dB
>150
20kΩ / 680pF
1.38V
29dB
+/-0.03dB
-3dB
>130dB