tacwise C9725V Operator's Manual page 7

Removing a jammed fastener (Fig. D)
NOTE: You must remove any jammed fasteners before using the tool any further. If you continue to try to fire a fastener while the tool is jammed, you could
cause damage to the mechanism.
• Disconnect the tool from the compressed air system.
• Remove any unused fasteners from the magazine channel; this should clear the jammed fastener(s).
• Remove any jammed fasteners from the nose by opening the quick-release nose gate.
• Any jammed fastener(s) will be visible and can be removed.
• Close and lock the nose gate before reconnecting the tool to the air system.
CAUTION: Never open the nose gate if there are fasteners in the magazine channel. This could cause the fasteners to fire out of the front of the tool and could
lead to serious injury.
• Following the removal of a jammed fastener, always carefully test the tool function before proceeding with any work. If fasteners become jammed frequently,
have the tool serviced by a Tacwise Engineer or appointed service agent.
FASTENING TOOLS FOR THE PROFESSIONAL
7