Zoom & Tilt (Switch); Daylight & Night Modes (Switch); Manage Poi (Points Of Interest) - Mio DigiWalker C510 User Manual

Note: When you reach 2D view by tilting the map during navigation, Smart Zoom will
tilt down the map as you press the Lock button. Use the 2D/3D button to
permanently switch to 2D view.
4.6.2.2 Zoom & Tilt (switch)
This button makes additional map controls available. The states of this button are:
When this feature is turned on, additional transparent buttons (Page 26 and Page
27) appear on the left side of the map screens for zooming and tilting the map.
4.6.2.3 Daylight & Night Modes (switch)
This button switches between the daylight and night colour schemes of MioMap. The
states of this button are:
Turn on or off the night colours manually to override the automatic colour scheme
switching.
Note: Using this option turns off the Automatic Night Colours feature. You need to re-
enable it at the General settings screen (Page 70) to have the colours change
automatically again.

4.6.2.4 Manage POI (Points of Interest)

Here you can set all the parameters of POIs that you have created and the visibility
of the built-in POIs that come with the map.
Manage built-in POI visibility
42