Battery Status (No. 12); Bluetooth Or Phone Call Status (No. 13) - Mio DigiWalker C510 User Manual

•
Black shows there is a GPS position, and navigation is possible. When only
one arc is shown, the position is 2D (no altitude available), and position error may
be significant, yet MioMap is ready to navigate.
•
A black dish and two arcs represent a 3D GPS position. MioMap is ready to
navigate.
•
When small car symbols are displayed under the dish, TMC information is
available.
4.3.10

Battery status (No. 12)

The status of the battery is also shown by MioMap. You can estimate the available
power reserve from the length of the bar inside. Some examples:
•
The thunderbolt in the battery shows the battery is being charged.
•
Battery is not charging, but it is at full capacity.
•
Battery in not full, but there is sufficient reserve capacity.
•
When the inside of the battery turns red, the battery needs recharging.
4.3.11

Bluetooth or Phone call status (No. 13)

When Bluetooth is turned off, a grey Bluetooth icon is displayed here.
Tap the icon to turn on the Bluetooth radio. When Bluetooth is on, the icon turns
blue.
If you tap the icon when it is blue, MioMap pauses, and the Bluetooth settings
screens of the device appears. To return to MioMap and continue navigating, tap the
Exit button in the bottom right corner.
During a phone call using the Mio DigiWalker C510 as a handsfree tool for your
mobile phone MioMap is paused, and you see the phone call screen. You can
continue navigation without stopping the phone call with the button in the top right
30