Radarcan DOG BARKING SILENCER PRO User Manual page 5

Instructions for Use
1. Plug the power source cable into the DOG BARKING
SILENCER PRO device as shown in Fig. 1. Hang it so that
the front part (where the LED light is) is pointing toward,
and as close as possible to, the area where the dog is
located (see Fig 2). Make sure that the dog cannot reach
and strike the DOG BARKING SILENCER PRO.
2. Plug the power element into the electrical outlet. The
green LED light indicator will come on.
3. Check to see that the DOG BARKING SILENCER PRO is
working, by clapping your hands together at a distance of
between 6 and 20 ft. from the device. The indicator light
will be red for about 4 seconds.
4. Recommendations:
• Try to keep the dog in only one space (the one where
the DOG BARKING SILENCER PRO is)
Use one DOG BARKING SILENCER PRO to train only
•
one dog. If there is more than one dog, use one DOG
BARKING SILENCER PRO for each dog, always in a
separate space.
• Make sure there are no obstacles between the
dog and the DOG BARKING SILENCER PRO. The