Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fisher-Price POWER WHEELS Barbie Jeep BEACH RANGER 4x4
Summary of Contents for Fisher-Price POWER WHEELS Barbie Jeep BEACH RANGER 4x4
- Page 1 This Owner's Manual is provided and hosted by Appliance Factory Parts. FISHER PRICE B2489 Owner's Manual Shop genuine replacement parts for FISHER PRICE B2489 Find Your FISHER PRICE Ride On Parts - Select From 999 Models -------- Manual continues below --------...
- Page 2 Product features may vary from the picture above. Please read this manual and save it with your original sales receipt. Tools needed for assembly: Phillips Screwdriver, Hammer, Pliers and Safety Scissors (tools not included). Use only with a Power Wheels ®...
-
Page 3: Table Of Contents
Service Center Network with more than 400 authorized ing can be damaged by riding this vehicle indoors. service centers nationwide. The authorized service Fisher-Price will not be responsible for damage to ® centers will repair or replace parts under warranty at no the floor if the vehicle is used indoors. -
Page 4: Warnings And Cautions
Warnings and Cautions ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. -
Page 5: Parts
Parts • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. - Page 6 Parts Winch Rear Bumper Battery Clamp Unit Taillight Housing Set 12 Volt Charger 12 Volt Battery Taillight Lens Set Spacer - 2 Steering Column Steering Wheel Headlight Lens - 2 Light Cover – 2 Lens Guard - 2 Long Seat Belt Strap Steering Gas Cap Wheel Cap...
- Page 7 Parts Key Assembly Wire Clip - 2 Hood Latch – 2 #8 x 4" Screw – 2 #10 x " Screw – 11 #8 x 1" Screw – 9 #10 x 1" Screw – 9 #8 - 32 x 1.625" Screw – 2 .354 Cap Nut –...
-
Page 8: Parts Diagram
Parts Diagram Note: Some parts shown are assembled on both sides of the vehicle. No. Part Quantity No. Part Quantity No. Part Quantity Vehicle Body (with #10 x 1" Screw Hood Water Jug and Holder) #10 x " Screw Spacer Steering Column #8 x 4"... -
Page 9: Battery Charging
Battery Charging About Thermal Fuses ELECTRICAL HAZARD Your Power Wheels 12 volt battery is equipped with a ® built-in thermal fuse. The thermal fuse is a self-resetting WARNING safety device which automatically “trips” and shuts down operation of the vehicle if the vehicle is overloaded or the •... - Page 10 Battery Charging Important Notes • Your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • You do not need to remove the battery from your vehicle to recharge it. Battery •...
-
Page 11: Assembly
Assembly WARNING Rear of Vehicle Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. - Page 12 Assembly Battery Compartment Door Dash Sound and Light Unit Battery Compartment • Replace the sound and light unit into the dash. • Insert three #10 x " screws into the unit, as shown. Tighten the screws with a Phillips screwdriver. 1.5V x 3 Do not over-tighten.
- Page 13 Assembly Windshield Wipers Light Wire Clamp Battery Clamp Unit Small Square Opening Light Wire Large Tabs Dash Dash Grooves Battery IMPORTANT! The battery clamp unit must be Clamp assembled to the dash before assembling the dash to the vehicle body. •...
- Page 14 Assembly Light Wire Dash Motor Connector Wire Clip Battery Clamp • Fit the light wire into the wire clip. Battery Compartment • Position the dash on the vehicle body. • Make sure the motor connector is through the groove in the dash.
- Page 15 Assembly End of Steering Column Steering Cap Nut .354" Bottom View .354 Cap Nut • Insert the end of the steering column through the hole Labels - Dash View in the steering rod. • Fit a cap nut onto the end of the steering column. Proper label application will help to keep the labels •...
- Page 16 Assembly Grille Steering Wheel Slot Steering Wheel Cap Slot • Fit the steering wheel cap into the center of the steering wheel. • Fit the lens tabs on the back of a lens assembly into the • Insert two #8 x 1" screws, as shown. headlight slots in the grille.
- Page 17 Assembly Front Bumper Hood Tabs Slot Slot Brush Guard Assembly • Position the hood over the front of the vehicle body • Fit and hold the brush guard assembly against the as shown. front bumper. • Insert the tabs on the hood into the slots in the •...
- Page 18 Assembly Short Seat T-Loop (Pull through slot) Tabs Seat Belt Strap Fastener End T-Loops PUSH HERE Slot Seat Seat Slot Back Slot Tabs • Turn the seat upside down. • Insert the fastener end of a short seat belt strap through •...
- Page 19 Assembly Sport Bar PUSH HERE Side Fender Sport Bar Supports PULL HERE • Fit a sport bar support to one side of the sport bar. • Insert a #8 -32 x 1.625 " screw through the sport • Fit the sport bar assembly into the holes in the bar support, the sport bar and out through the sport vehicle body.
- Page 20 Assembly Rear Bumper Tabs Bumper Tabs Rear Bumper Support Rear Bumper Lower Rail • Lift the rear of the vehicle. • Align the holes in the rear bumper tabs with the screw • Turn the vehicle upright. Face the rear of the vehicle. pegs on the underside of the vehicle.
-
Page 21: Label Decoration
Label Decoration Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. •... - Page 22 Label Decoration 26 (On top of 2) 27 (On top of 7) Right Side View 25 (On top of 1) (Both sides) Left Side View...
-
Page 23: Battery Installation
Battery Installation Battery Battery IMPORTANT! Use only a Power Wheels ® 12 volt battery. Battery Clamp Use of any other battery will damage your vehicle. Make Compartment sure that you charge the battery for at least 18 hours using the enclosed Power Wheels 12 volt charger before ®... -
Page 24: Battery Care And Disposal
Battery Care and Disposal Disposal Care If a battery leak develops, avoid contact with the leaking • Your Power Wheels ® battery is a sealed lead-acid acid and place the damaged battery in a plastic bag. Please battery. It must be recycled or disposed of in an refer to the information on this page for proper disposal. -
Page 25: Rules For Safe Driving
Rules for Safe Driving RIDING HAZARD WARNING Prevent Injuries and Deaths • Direct Adult Supervision Required. • Keep Children Within Safe Riding Areas Use vehicle on generally level ground ONLY! These areas must be: - away from swimming pools and other bodies of water to prevent drownings. -
Page 26: How To Operate Your Vehicle
How to Operate Your Vehicle To Back Up Beginner Use - Low Speed Drive As assembled, your vehicle is ready to roll in low speed mph, maximum). It has been pre-set so it will only operate in low speed. After your child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow the vehicle to operate in low or high speed. -
Page 27: Sounds And Light
How to Operate Your Vehicle Sounds and Lights Advanced Use - High Speed Drive Sounds and Light Unit Shifter Storage Position Lock-Out Position Lock-Out Screw Buttons • Before you disconnect the high speed lock-out, make sure your child knows how to steer, how to start and stop the vehicle and knows the rules for safe driving. -
Page 28: Fcc Statement
Bumper-to-Bumper* FCC Statement Limited Warranty (United States Only) *One year limited warranty from the date of This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 purchase on the Power Wheels ®... -
Page 29: Problems And Solutions Guide
Problems and Solutions Guide IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday. Or, contact your local Power Wheels authorized service center. - Page 30 Problems and Solutions Guide Problem Possible Cause Solution Short run time (Less than Undercharged battery Charge the battery. A new battery should have been 1 - 3 hours per charge) charged for at least 18 hours before using the vehicle for the first time.
- Page 31 Problems and Solutions Guide Problem Possible Cause Solution Vehicle runs in low speed, but High speed lock-out not disconnected The vehicle was pre-set to run only in low speed. does not run in high speed To allow the vehicle to run in low and high speed, you must disconnect the High Speed Lock-Out.
-
Page 32: Authorized Service Centers
Authorized Service Centers We are continually expanding our Authorized Service Center Network. Please check this listing for the independently owned and operated Authorized Service Center nearest you. If there is not one in your area, please call Power Wheels ® Consumer Relations at 1-800-348-0751. - Page 33 Authorized Service Centers SOUTH BEND (OSCEOLA) - AAA Appliance Service MARYLAND MISSISSIPPI Co., 11868 Lincoln Way West, 46561, (574) 679-4981 ABERDEEN - Burkheimer Garden Equipment, HATTIESBURG - Champion Cycle & Fitness, 651 Gilbert Road, 21001, (410) 734-4577 2625 Lincoln Road, 39402, (601) 310-0270 TERRE HAUTE - Corey Electronics, 1101 S.
- Page 34 Authorized Service Centers COMMACK, L.I. - Turnpike Appliance Service, MANSFIELD - Boliantz Hardware, 860 Ashland Road, SOUTH CAROLINA 6181 Jericho Turnpike, 11725, (631) 499-3355 44905, (419) 589-5467 AIKEN - Dunagan’s Sewing & Vacuum, 2160 University Parkway, 29801, (803) 648-4837 EAST AURORA - Sem-Fab of Western New York, PORTSMOUTH - Market St Hardware &...
- Page 35 Authorized Service Centers UTAH WASHINGTON WISCONSIN OREM - The Mending Shed, 1735 South State Street, ARLINGTON - Cordz Limited, 6516 211th Avenue, ELK MOUND - Epp Electronics, E9485-A County 84058, (801) 225-8012, (800) 339-9297 98223, (360) 435-2471 Road EE, 54739, (715) 879-4634 SALT LAKE CITY - Appliance Service Center, Inc., KENNEWICK - At Home Electronic Services Inc., GREENBAY - Kastle Carts, Inc., 2301 N.
- Page 37 ©2003 Mattel, Inc. All Rights Reserved. ® and ™ are registered trademarks of Mattel Inc. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A. Fisher-Price, Power Wheels, Power Wheels by Fisher-Price, Power Lock and Power Stick are U.S. trademarks of Mattel, Inc. Printed in Mexico...
Need help?
Do you have a question about the POWER WHEELS Barbie Jeep BEACH RANGER 4x4 and is the answer not in the manual?
Questions and answers