Creating And Deleting Raid Sets With Bios Utility - MSI P965 Neo User Manual

JM icron RAID Introduction

Creating and Deleting RAID sets with BIOS Utility

Be sure to set RAID mode for the Onboard JMB361 Mode of Integrated Periph-
erals in BIOS before configuring the JMicron BIOS utility. After that press F10 to save
the configuration and exit. During boot up (POST), press CTRL+J to enter the JMicorn
BIOS RAID utility.
The RAID Utility menu screen will be displayed. A brief description of each section is
presented below.
M ain M enu
The Main Menu in the upper left corner is used to choose the operation to be
performed. The selections are:
Create RAID set - is used to create a new legacy RAID set.
Delete RAID set - is used to delete a legacy RAID set.
Revert HDD to non-RAID - is used to revert an existed-RAID HDD to non-RAID.
Save And Exit Setup - save all settings and exit the BIOS utility.
Exit W ithout Saving - exit the BIOS utiltiy without any saving.
Hard Disk Driver List
The menu shows the model number and capacities of the drives physically
attached to the SATAII & PATA ports.
RAID Disk Driver List
The menu shows the current configuration of RAID set.
B-3