Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lumikit Manuals
  4. Recording Equipment
  5. PRO X4
  6. Quick manual

Lumikit PRO X4 Quick Manual

Hide thumbs Also See for PRO X4:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
LUMIKIT PRO X4 / RACK INTERFACE
LUMIKIT PRO X4 / RACK
LUMIKIT PRO X4 / RACK
LUMIKIT PRO X4 / RACK
READ THE MANUAL BEFORE USE THE PRODUCT!
READ THE MANUAL BEFORE USE THE PRODUCT!
READ THE MANUAL BEFORE USE THE PRODUCT!
READ THE MANUAL BEFORE USE THE PRODUCT!
Important considerations, read before using the product
Important considerations, read before using the product
Important considerations, read before using the product
Important considerations, read before using the product: : : :
The difference between the Lumikit PRO X4 and Lumikit PRO X4 RACK interface is the cabinet and the power
The difference between the Lumikit PRO X4 and Lumikit PRO X4 RACK interface is the cabinet and the power
The difference between the Lumikit PRO X4 and Lumikit PRO X4 RACK interface is the cabinet and the power
The difference between the Lumikit PRO X4 and Lumikit PRO X4 RACK interface is the cabinet and the power
supply, as the power supply is different from one model to another, the isolation is also different, see more
supply, as the power supply is different from one model to another, the isolation is also different, see more
supply, as the power supply is different from one model to another, the isolation is also different, see more
supply, as the power supply is different from one model to another, the isolation is also different, see more
information in
information in manual
manual chapter 1 and chap
chapter 1 and chapter 10.
information in
information in
manual
manual
chapter 1 and chap
chapter 1 and chap
The network cable supplied with the interface is a straight one, if the interface is connected directly in older
The network cable supplied with the interface is a straight one, if the interface is connected directly in older
The network cable supplied with the interface is a straight one, if the interface is connected directly in older
The network cable supplied with the interface is a straight one, if the interface is connected directly in older
computers, it might be necessary to use a crossover network cable.
computers, it might be necessary to use a crossover network cable.
computers, it might be necessary to use a crossover network cable.
computers, it might be necessary to use a crossover network cable.
The earth pin from the power supply connector is connected to
The earth pin from the power supply connector is connected to the interface housing.
The earth pin from the power supply connector is connected to
The earth pin from the power supply connector is connected to
We recommend the use of a terminator resistor in the last DMX device of the line, the terminator resistor
We recommend the use of a terminator resistor in the last DMX device of the line, the terminator resistor
We recommend the use of a terminator resistor in the last DMX device of the line, the terminator resistor
We recommend the use of a terminator resistor in the last DMX device of the line, the terminator resistor
consists in a 120 ohms resistor and 1/2W or 1W (different values can be tested) connected between the pin 2
consists in a 120 ohms resistor and 1/2W or 1W (different values can be tested) connected between the pin 2
consists in a 120 ohms resistor and 1/2W or 1W (different values can be tested) connected between the pin 2
consists in a 120 ohms resistor and 1/2W or 1W (different values can be tested) connected between the pin 2
and 3 of the DMX
and 3 of the DMX
and 3 of the DMX connector connected in the output of the last DMX device.
and 3 of the DMX
connector connected in the output of the last DMX device.
connector connected in the output of the last DMX device.
connector connected in the output of the last DMX device.
The USB port of this interface was designed only for Pen Drives usage,
The USB port of this interface was designed only for Pen Drives usage, CONNECTING ANY OTHER DEVICE THAT
The USB port of this interface was designed only for Pen Drives usage,
The USB port of this interface was designed only for Pen Drives usage,
IS NOT A PEN DRIVE IN THIS PORT WILL DAMAGE THE INTERFACE, THESE DAMAGES WILL NOT BE COVERED BY THE
IS NOT A PEN DRIVE IN THIS PORT WILL DAMAGE THE INTERFACE, THESE DAMAGES WILL NOT BE
IS NOT A PEN DRIVE IN THIS PORT WILL DAMAGE THE INTERFACE, THESE DAMAGES WILL NOT BE
IS NOT A PEN DRIVE IN THIS PORT WILL DAMAGE THE INTERFACE, THESE DAMAGES WILL NOT BE
WARRANTY, more information on chapter 14, referring to product warranty.
WARRANTY,
WARRANTY,
WARRANTY,
more information on chapter 14, referring to product warranty.
more information on chapter 14, referring to product warranty.
more information on chapter 14, referring to product warranty.
Depending on the Pen Drive model, the interface might reset or freeze for a few instants as soon as the Pen
Depending on the Pen Drive model, the interface might reset or freeze for a few instants as soon as the Pen
Depending on the Pen Drive model, the interface might reset or freeze for a few instants as soon as the Pen
Depending on the Pen Drive model, the interface might reset or freeze for a few instants as soon as the Pen
Drive is connected to the interface, this is normal,
Drive is connected to the interface, this is normal, therefore it is recommended to connect the Pen Drive with
Drive is connected to the interface, this is normal,
Drive is connected to the interface, this is normal,
the interface switched off.
the interface switched off.
the interface switched off.
the interface switched off.
Not every Pen Drive models are compatible with the recording, see chapter 6 for the compatible models.
Not every Pen Drive models are compatible with the recording, see chapter 6 for the compatible models.
Not every Pen Drive models are compatible with the recording, see chapter 6 for the compatible models.
Not every Pen Drive models are compatible with the recording, see chapter 6 for the compatible models.
Watch the initial configuration video of the Lumikit
Watch the initial configuration video of the Lumikit
Watch the initial configuration video of the Lumikit
Watch the initial configuration video of the Lumikit PRO X4 and Lumikit PRO X4 RACK:
INTERFACE QUICK GUIDE
INTERFACE
INTERFACE
ter 10.
ter 10.
ter 10.
therefore it is recommended to connect the Pen Drive with
therefore it is recommended to connect the Pen Drive with
therefore it is recommended to connect the Pen Drive with
PRO X4 and Lumikit PRO X4 RACK:
PRO X4 and Lumikit PRO X4 RACK:
PRO X4 and Lumikit PRO X4 RACK:
Lumikit Sistemas para Iluminação | www.lumikit.com.br
Lumikit Sistemas para Iluminação
Lumikit Sistemas para Iluminação
Lumikit Sistemas para Iluminação
QUICK GUIDE
QUICK GUIDE
QUICK GUIDE
the interface housing.
the interface housing.
the interface housing.
CONNECTING ANY OTHER DEVICE THAT
CONNECTING ANY OTHER DEVICE THAT
CONNECTING ANY OTHER DEVICE THAT
COVERED BY THE
COVERED BY THE
COVERED BY THE
http://www.lu
http://www.lu
http://www.lu
http://www.lumikit.com.br/videos
mikit.com.br/videos
mikit.com.br/videos
mikit.com.br/videos
1 1 1 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the PRO X4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lumikit PRO X4

Summary of Contents for Lumikit PRO X4

  • Page 1 Important considerations, read before using the product: : : : The difference between the Lumikit PRO X4 and Lumikit PRO X4 RACK interface is the cabinet and the power The difference between the Lumikit PRO X4 and Lumikit PRO X4 RACK interface is the cabinet and the power...
  • Page 2 • Lumikit PRO X4 interface: 250V / 1A; Lumikit PRO X4 interface: 250V / 3A (located in back panel); b: ON/OFF key and LED on the right indicates if it is on; • c: “RESET/CHANGE IP” button for resetting, see chapter 5;...

  • Page 3: Broadcast Mode

    Lumikit SHOW software (same procedure for Lumikit LED), the interface is compatible with other software and drivers since these are also compatible for Lumikit LED), the interface is compatible with other software and drivers since these are also compatible...
  • Page 4 255.255.255.255, this IP address send theArt-Net data package to all interfaces connected in the network: f) In field “number of universes”, select 4, because the PRO X4 interface has 4 universes, if other setting is used, for example, if interface is configured for only 1 universe, fill 1 in this field;...

  • Page 5: Unicast Mode

    At this time the following setting can be viewed, when clicking “Confirm” and retuning to Lumikit SHOW or Lumikit LED main window the interface Art-Net LED must be on without blink, with this the configuration is finished: If the DMX update rate is low, it’s possible to increase the value in the field “Hardware update rate”, most of the systems Works well with 30 fps (frames per second).

  • Page 6: Interface Reset

    Program recording in the Pen Drive In the Lumikit PRO X4 interface it is possible to connect a Pen Drive in the USB port, this Pen Drive can be used to record up to 20 programs, each program can have at most 30 minutes of Art-Net signal at 25 FPS. The interface has a “PEN DRIVE LED STATUS”, depending on the Pen Drive situation the LED can blink in different ways:...
  • Page 7 Drive, the next program will be reproduced by pressing the button “PLAYBACK/SAVE CONFIG” again. The program reproduction can be also be made through the remote control app, check the next chapters of this manual. Lumikit Sistemas para Iluminação | www.lumikit.com.br Lumikit Sistemas para Iluminação 7 7 7 7 Lumikit Sistemas para Iluminação...

  • Page 8: Problems And Solutions

    Q: The interface does not turn on. A: In case the interface does not turn on, check the fuse, it should be a 250V / 1A fuse for Lumikit PRO X4 and 250V / 3A for Lumikit PRO X4 RACK, disconnect the interface from the electric network to avoid electric shocks while the fuse is being verified. Check if the interface is connected in wrong tension, also check the power supply.

This manual is also suitable for:

Pro x4 rack