Rear Panel; Hardware Setup; Central Processing Unit (Cpu) - MSI MS-7298 Instruction Manual

Msi ms-7298 motherboard: instruction manual
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Rear Panel

The rear panel provides the following connectors:

Hardware Setup

This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as
how to setup the jumpers on the mainboard. It also provides the instructions on connecting the
peripheral devices, such as the mouse, keyboard, etc. While doing the installation, be careful in
holding the components and follow the installation procedures.
(For the latest information about CPU, please visit:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php)
Central Processing Unit: CPU
The mainboard supports AMD
mainboard uses a CPU socket called Socket AM2 940-pin for easy CPU installation.
CPU Installation Procedures for Socket AM2
1. Please turn off the power and unplug the power cord before
installing the CPU.
2. Pull the lever sideways away from the socket. Make sure to raise
the lever up to a 90-degree angle.
3. Look for the gold arrow of the CPU. The gold arrow should point as
shown in the picture. The CPU can only fit in the correct orientation.
4. If the CPU is correctly installed, the pins should be completely embedded into the socket and
can not be seen. Please note that any violation of the correct installation procedures may
cause permanent damages to your mainboard.
5. Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move
while the lever is being closed, always close the lever with your fingers pressing tightly on top
of the CPU to make sure the CPU is properly and completely embedded into the socket.
MSI Reminds You...
Overheating
Overheating will seriously damage the CPU and system; always make sure the cooling fan can
work properly to protect the CPU from overheating.
Replacing the CPU
While replacing the CPU, always turn off the ATX power supply or unplug the power supply
power cord from grounded outlet first to ensure the safety of CPU.
®
Sempron / Athlon 64 / Under Athlon 64 FX processors. The
4
Corr ect CPU
placeme nt
Gold ar row

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K9ng neo-v

Table of Contents