Page 1
® RANGE HOOD MODEL NUMBER: G2-6-1500 FRHWM5030-60 CONFORMS TO UL STD.507 CERTIFIED TO CSA STD.C22.2 NO.113 4002621 INSTRUCTION & INSTALLATION MANUAL Read these instructions carefully before using your appliance, and keep it carefully. If you follow the instructions, your appliance will provide you with many years of good service.
TABLE OF CONTENTS Customer Care Warning Important Safety Product Dimension Name of Parts and Accessories Installation Preparations Installation Instructions Operating Instruction Cleaning and Maintenance Troubleshooting Wire Diagram Warranty...
A customer service representative will contact you as soon as possible. All warranty work needs to be authorized by FORNO customer service. All our authorized service providers are carefully selected and rigorously trained by us.
WARNING FOR YOUR SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
Page 6
WARNING FOR YOUR SAFETY This chapter provides you with important safety notices when handling the device. The device corresponds with the required safety regulations. Improper use can result in personal or property damages. Please read the information contained herein so that you can become familiar with your device quickly and take advantage of the full scope of its functions.
Important Safety Instructions To avoid the possibility of an explosion or fire, do not store or use combustible, flammable or explosive vapors and liquids (such as gasoline) inside or in the vicinity of this or any other appliance. Keep all combustible items (such as aerosol cans) away from cook top burners, ovens and range hoods.
Names of Parts and Accessories Mounting Bracket 10 GU10 Lamp Body 11 Air outlet Switch Cord 12 PCB Lamp Cord 13 Power Cord Motor Housing 14 Capacitor Four-ring cover Sun Grid Cover Motor Worm Shell Switch 17 Oil Cup Filter...
Installation Preparation 1.MOUNTING HEIGHT FOR THE MOST EFFICIENT & QUIET OPERTION: • A distance of 24” to 32” is recommended between stove top and the bottom of range hood. • If the hood is mounted too low this could result in heat and/or fire hazard. If the hood is mounted too high the controls will be hard to reach, and the hood will lose its performance and efficiency.
Installation Instructions NOTE: DO NOT TRY TO REMOVE BLOWER OR ITS HOUSING. YOU WILL BE UNABLE TO PUT IT BACK IN. MORE IMPORTANTLY, THE WARRANTY WILL BE VOIDED. STEP 1: PROTECT THE COOK TOP Put a thick, protective covering over counter top, cook top or range to protect from damage or dirt. STEP 2: CREAT WORK STATION (OPTIONAL ONLY) Have 2 pieces of wood about 2”...
Page 12
Installation Instructions (continued) STEP 7B: SECURE THE HOOD TO WALL Use stud finder to find the stud and use 1/8” drill bit to drill though the back of the hood. Secure the hood by using 1 7/8” provided screws though the back of the hood to the studs. STEP 8: CONNECT DUCTWORK Connect the exhaust on the hood to the ductwork.
Operating Instructions BLACK SCREEN TOUCH CONTROL Important Note: • AUTOMATIC SHUT OFF: this range hood will shut off after approx. 2.5 hours when left running. • SCREEN TURN OFF: This range hood is equipped with remote control sensor that will self-calibrate within 5 seconds when the range hood is first electrically activated.
Cleaning and Maintenance This chapter provides you with important notices with regard to cleaning and maintaining the device. Please observe the notices to prevent damages due to cleaning the device incorrectly and to ensure trouble-free operation. Operations: • Read and understand all instructions and warnings in this manual before operating the appliance. Save these instructions for future reference.
Troubleshooting 1. If the range hood or lights does not operate after installation: • Check if the range hood has been plugged in. Make sure that all power has been turned back ON. • Swap out light assembly to working ones to deter mine whether it is caused by defective bulbs. 2.
Wire Diagram CIRCUIT DIAGRAM fan switch /Interrupteur du ventilateur motor /moteur lamp switch power supply /Interrupteur board/tableau de la lampe d'alimentation motor /moteur...
Retain proof of original purchase to establish warranty period. arising from the product being used in a manner other Forno’s liability on any claim of any kind, with respect to the than what is normal and customary for residential use.
Page 18
PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT SOLD BY FORNO THAT IS NOT A DIRECT RESULT OF NEGLIGENCE ON THE PART OF FORNO THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NON-TRANSFERABLE, AND STATES YOUR EXCLUSIVE REMEDY.
Page 19
® Customer Support: Call 1-866-231-8893 or email: info@forno.ca...
Need help?
Do you have a question about the FRHWM5030-60 and is the answer not in the manual?
Questions and answers