Table of Contents
Advertisement
Connecting the External Monitor
You can connect an external monitor to your computer through the VGA port
for a larger view with higher resolution. To connect the monitor:
1.
Confirm that the computer is turned off.
2.
Plug the monitor's D-type connector into the computer's VGA port.
3.
Connect the monitor's power cord, and then turn on the monitor.
4.
Turn on the computer, and the monitor should respond by default. If
not, you can switch the display mode by pressing [Fn]+[F2].
Alternately, you can change the display mode by configuring the
settings in Display Properties of Windows operating system.
Connecting the TV
The S-Video connector of your computer allows you to use a TV to display the
computer images for your specific purpose, such as enjoying your DVD movies.
To connect a TV, you will need the S-Video cable (not included). Then, you can
configure the display settings as described in the section Using the Video
Function of Chapter 2.
Connecting the USB Devices
The USB 2.0 ports of your computer allow you to connect many peripheral
devices, such as the mouse, keyboard, speakers, modem, external hard disk
module, printer, and more. The USB-standard interface supports "plug-and-
play" technology, so that you can connect and remove the USB devices without
turning off the computer.
To connect the USB device, simply connect the cable of the device to the USB
port of your computer.
6 - 3
Advertisement
Table of Contents
