thomann fun generation Stagemix 400 User Manual page 15

1 [PEAK] | Status LED. The LED flashes if the signal of the input is overloaded.
2 [MIC] | Microphone input, designed as XLR input socket, 3-pin
3 [LINE] | Line input, designed as 6.35-mm jack socket
4 [TREBLE] | Rotary control for adjusting the high frequencies of the respective channel
5 [BASS] | Rotary control for adjusting the low frequencies of the respective channel
6 [EFFECT] | Rotary control for adjusting the signal portion sent to the internal effects section
7 [VOLUME] | Rotary control for adjusting the volume of the respective channel
8 [STEREO IN 5/6] | Signal input for channel 5/6, designed as 6.35-mm jack sockets or cinch sockets
9 [STEREO IN 7/8] | Signal input for channel 7/8, designed as 3.5-mm jack socket
10 [VOLUME] | Rotary control for adjusting the volume of the signal inputs for channels 5/6 and 7/8
11 [MONITOR OUTPUTS] | Signal output for connecting two active speakers, designed as 6.35-mm jack sockets or cinch
sockets
12 [HEADPHONE OUTPUT] | Signal output for connecting a headset, designed as 3.5-mm jack socket
13 [MONITOR OUTPUTS VOLUME] | Rotary control for adjusting the volume of the monitor outputs and the headphone
output, regardless of the rotary control for adjusting the overall volume
14 [MP3 PLAYER] | For playing MP3 music files from an SD card or USB flash drive or via Bluetooth®
Connections and controls
Stagemix 400
15
PA System