thomann fun generation Stagemix 400 User Manual page 12

Installation
Removing the powermixer
Removing accessories
Stagemix 400
12
PA System
NOTICE!
Potential property damage due to unsuitable stands!
If the device is mounted on an unsuitable stand, there is a risk that the stand will
fall over and cause damage.
Only use stands whose maximum bearing capacity is at least as high as the
weight of the device. Always ensure that the stand is stable.
The powermixer is located in the back wall of one of the speakers. Release the locking mecha‐
nism on the top of the speaker and remove the powermixer.
The accessories are located in a storage compartment in the other speaker. Release the locking
mechanism on the top of the speaker and remove the back wall to remove the accessories.