Related Manuals for ESIT Ethernet+
Summary of Contents for ESIT Ethernet+
- Page 1 Nişantepe Mh. Gelin Çiçeği Sk. No:36 Çekmeköy 34794 İstanbul (216) 585 1818 (216) 585 1819 www.esit.com.tr Ethernet + User Manual - R01...
- Page 2 Esit Ethernet + User Manual...
- Page 4 Esit Ethernet + User Manual...
- Page 5 Esit Ethernet+ User Manual ________________________________________________________ 1. Check for All Required Hardware • Ethernet+ device • Quick Start Guide • Software & Manual CD • Network Cable (Not included in package) • Power Supply (Not included in package) • Serial Cable (Not included in package)
- Page 6 Esit Ethernet+ User Manual ________________________________________________________ 2. LED Status A. Serial RX/TX B. Network IP status C. ModbusTCP messages detector 3. Connectors D. Power supply connector E. Ethernet Connector Serial Connector Sayfa 2...
- Page 7 • Connect the Ethernet+ and an ESIT indicator (ECI, ART, PWI, LCA) to each other by serial cable • Set the indicator serial communication mode to mode one Serial RX status light in Ethernet+ should start to blink which means data comes from serial bus.
- Page 8 PC should be in same LAN. • Follow the prompts and set the path for installation • After finishing installation, start the Esit ES program from installed path. When program starts you should see the program’s main window as below picture. Sayfa 4...
- Page 9 6. Detecting connected devices • When program starts, it starts to discover the connected Ethernet+s to the LAN. When it finds a Ethernet+ device it will write a message in the log bar down side the main window (below picture).
- Page 10 Esit Ethernet+ User Manual ________________________________________________________ • In the “Device Settings Panel” in the right side of the ES application you can see the Ethernet+’s information like device name and IP. • Open your web browser and enter the Ethernet+ IP which is shown in ES.
- Page 11 Esit Ethernet+ User Manual ________________________________________________________ 8. Test the device • In the ES software click the “Off” button from “Device Settings Panel” in the right side and it will fetch the device’s current value and show it in the “Device Panel”.
- Page 12 Esit Ethernet+ User Manual ________________________________________________________ Sayfa 8...
Need help?
Do you have a question about the Ethernet+ and is the answer not in the manual?
Questions and answers