Specifications - dbx 262 Operation Manual

Dbx compressor/ limiter model 262 operation manual
Table of Contents

Advertisement

Specifications

Inputs:
Connectors:
Type:
Impedance:
Max Input Level
CMRR:
Outputs::
Connectors:
Type:
Impedance:
Max Output Level:
System Performance:
Bandwidth:
Frequency Response:
Noise:
Dynamic Range:
THD+Noise
IMD:
Interchannel Crosstalk:
Stereo Coupling:
Compressor:
Threshold Range:
Threshold Characteristic:
Ratio:
Attack Time:
Release Time:
Output Gain:
Function Switches:
OverEasy®
Bypass:
Stereo Couple:
Indicators:
Gain Reduction Meter:
Compressor Threshold
Meter:
Bypass Switch:
Stereo Couple Switch:
Power Supply:
Operating Voltage:
Power Consumption:
Mains Connection:
Physical:
Dimensions:
Weight
Shipping Weight:
Note: Specifications subject to change
Compressor/
Limiter
262
1/4" TRS
Electronically balanced/unbalanced, RF filtered
Balanced > 50 k½, unbalanced > 25 k½.
+22 dBu, balanced or unbalanced
> 40 dB, typically > 55 dB at 1 kHz
1/4" TRS
Impedance-balanced/unbalanced, RF filtered
Balanced 200 ½, unbalanced 100 ½
> +21 dBu balanced/unbalanced into 2 k½ or greater
20 Hz to 20 kHz, +0/-0.5 dB
< 3 Hz to > 90 kHz, +0/-3 dB
< -92 dBu, unweighted, 22 kHz measurement bandwidth
> 114 dB
0.01% typical at +4 dBu, 1 kHz unity gain
0.09% typical at +20 dBu, 1 kHz, unity gain
< 0.2%, any amount of compression up to 40 dB, 1 kHz
< 0.2% SMPTE
< -90 dB at 1 kHz
True RMS Power Summing™
-40 dBu to +20 dBu
Selectable OverEasy® or hard knee
1:1 through °:1 to -1:1; > 60 dB maximum compression
Typically 15 ms for 10 dB, 5ms for 20 dB, 3 ms for 30 dB
Program-dependent, 125 dB/sec rate
-20 to +20 dB
Activates the OverEasy® compression function, one switch per channel.
Electronically disables gain reduction, one switch per channel.
Couples channels for stereo operation. Channel One is the master.
8-segment LED bar graph at 1,3,6,10,15,20,25, and 30 dB
3-segment LED bar graph at Below (-), OverEasy® (O), and Above (+)
Red LED per channel
Amber LED
100VAC 50/60 Hz, 120VAC 60 Hz
230 VAC 50/60 Hz
15 Watts
IEC 320 receptacle
1.75" H X 19" W X 6.9"D (4.4cm x 48.3 cm x 17.5cm)
3.6 lbs. (1.6 kg)
5.3 lbs. (2.4 kg)
Applications
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF