Boot Up Num-Lock LED
This setting is to set the Num Lock status when the system is powered on. Set-
ting to On will turn on the Num Lock key when the system is powered on.
Setting to Off will allow users to use the arrow keys on the numeric keypad.
Setting options: On, Off.
Seek Floppy
Setting to [Enabled] will make BIOS seek floppy drive A: before booting the
system. Settings: [Enabled], [Disabled].
Security Option
This specifies the type of BIOS password protection that is implemented. Set-
tings are described below:
Option
Description
Setup
The password prompt appears only when end users try
to run Setup.
A password prompt appears every time when the com-
System
puter is powered on or when end users try to run Setup.
Setting BIOS Function
3-9