Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MHSC CSDV30PV
Summary of Contents for MHSC CSDV30PV
- Page 1 This Owner's Manual is provided and hosted by Appliance Factory Parts. MAJESTIC CSDV30PV CONCORDE Owner's Manual Shop genuine replacement parts for MAJESTIC CSDV30PV CONCORDE Find Your MAJESTIC Fireplace Parts - Select From 585 Models -------- Manual continues below --------...
- Page 2 Direct Vent Gas Stove Installation and Operating Instructions models: CSDV20SNV,CSDV20DNV,CSDV20SLp,CSDV20DLp, CSDV30SNV,CSDV30DNV,CSDV30SLp,CSDV30DLp, CSDV40SNV,CSDV40NDV,CSDV40SLp,CSDV40DLp WARNINGS IF THE INFORmATION IN THESE INSTRUCTIONS ARE NOT FOLLOWED ExACTLy, A FIRE OR ExpLOSION mAy RESULT CAUSING pROpERTy DAmAGE, pERSONAL INjURy OR LOSS OF LIFE. O FF –...
-
Page 3: Table Of Contents
Congratulations you have purchased a state-of-the-art gas appliance featuring the Lex-Fire Burn System available exclusively on mHSC gas appliances. The Lex-Fire Burn System sets a new standard for flame appearance through innovative log design, burner technology and ember placement. Each element affecting combustion and flame appearance was carefully scrutinized and strategically balanced during the design process. -
Page 4: Important Safety Information
ImpORTANT SAFETy INFORmATION CSDV Series Direct Vent Gas Stove INSTALLER OWNER Please leave these instructions with the appliance. Please retain these instructions for future reference. • Read this owner’s manual carefully and completely before trying to assemble, operate, or service this fireplace. •... -
Page 5: Code Approval
CSDV Series Direct Vent Gas Stove ImpORTANT SAFETy INFORmATION 1. Do not use this stove to cook food or burn paper or other objects. 13. Never place anything on top of stove. 14. Do not use any solid fuels (wood, coal, paper, card- board, etc.) in this stove. -
Page 6: Product Features
CSDV0NV Nat. 18.000 1,500 authorities having jurisdiction for installations at eleva- CSDV0PV 19,000 15,000 tions above 4,500 feet (1,370 m). CSDV30NV Nat. 8,000 17,000 CSDV30PV 8,000 1,000 GAS pRESSURES Front Rear Natural Propane (LP) CSDV40NV Nat. 33,000 6,000 Inlet Minimum 4.5”... -
Page 7: Stove Dimensions
STOVE DImENSIONS CSDV Series Direct Vent Gas Stove Figure 2 - Stove Dimensions Ref. CSDV20 CSDV30 CSDV40 0M\," (530 mm) 6Z\x" (673 mm) 9Z\x" (749 mm) 3Z\x" (597 mm) 8Z\x" (74 mm) 30Z\x" (775 mm) 586056 18C\v" (476 mm) 1" (533 mm) "... -
Page 8: Stove Location
INSTALLATION INFORmATION CSDV Series Direct Vent Gas Stove STOVE LOCATION Plan for the installation of your stove. This includes deter- • Minimum clearances to combustibles, side-wall, ceiling, mining where the unit is to be installed, the vent configura- woodwork, and windows must be maintained. Page tion to be used, framing and finishing details, and whether 9, Figure 4 any optional accessories (i.e. -
Page 9: Clearances
CLEARANCES CSDV Series Direct Vent Gas Stove CLEARANCES TO COmBUSTIBLES The dimensions shown in Figures 4 and 5 are minimum clearances to maintain in installing this heater. Left and right clearances are determined when facing the front of the heater. Follow these instructions carefully to ensure safe installation. -
Page 10: Clearances / Height Requirements
CLEARANCES / HEIGHT REqUIREmENTS CSDV Series Direct Vent Gas Stove ST113 Figure 5 - Alcove Clearances ST1132 alcove clearances Alcove minimum Dimensions Height from Hearth Width Depth model CSDV0 5" (131 mm) 30" (76 mm) 36" (914 mm) CSDV30 64" (166 mm) 35"... -
Page 11: Remove Unit From Crate
REmOVE UNIT FROm CRATE CSDV Series Direct Vent Gas Stove 1. Remove two () straps. Figure 6 Hearth Door . Open plastic bag and slide to bottom of unit. Figure 7 3. Lift up on ash lip and pivot down to open control door. Figure 8 4. -
Page 12: Venting Installation
Installation of any damaged venting component. • Unauthorized modification of the venting system. • Installation of any component part not manufactured or approved by MHSC. • Installation other than permitted by these instructions. Horizontal sections of this vent system This stove must be vented to the outside. -
Page 13: Installation Planning
VENTING INSTALLATION CSDV Series Direct Vent Gas Stove INSTALLATION pLANNING There are two basic types of direct-vent installation: • Horizontal Termination • Vertical Termination It is important to select the proper length of vent pipe for the Never run the vent pipe level or downward. type of termination you choose. -
Page 14: General Venting Information - Termination
3. MHSC assumes no responsibility for the improper only permitted if veranda, porch, deck or balcony is fully open on a performance of the appliance when the venting system minimum sides beneath the floor: does not meet these requirements. -
Page 15: Venting Graph
VENTING INSTALLATION CSDV Series Direct Vent Gas Stove Termination Clearances Termination clearances for buildings with combustible and noncombustible exteriors. Inside Corner Alcove Applications* Outside Corner Combustible 6" (152 mm) Combustible 6" (152 mm) Noncombustible 2" (51 mm) Noncombustible 2" (51 mm) Balcony - Balcony - with no side wall... -
Page 16: Installation For Horizontal Termination
CSDV Series Direct Vent Gas Stove VENTING INSTALLATION . Rigid vent pipes and fittings have special twist-lock INSTALLATION FOR HORIZONTAL TERmI- connections. Assemble the desired combination of pipe NATION and elbows to the appliance adaptor with pipe seams 1. Determine the route your horizontal venting will take. oriented towards the wall or floor. - Page 17 VENTING INSTALLATION CSDV Series Direct Vent Gas Stove Vent Opening for Combustible Walls Do not recess vent termination into any 9Z\x" (41 mm) wall. This will cause a fire hazard. 9Z\x" (41 mm) 5. Slide the wall thimble over the vent pipe before con- necting the horizontal run to the vent cap.
- Page 18 VENTING INSTALLATION CSDV Series Direct Vent Gas Stove Table 2 - Horizontal Venting maximum Vertical Vertical Vertical Horizontal (H) minimum minimum minimum CSDV20 (V) CSDV30 (V) CSDV40 (V) 4" 41Z\x" 5Z\x" 54Z\x" (610 mm) (1054 mm) (1334 mm) (1384 mm) 95Z\v"...
-
Page 19: Installation For Vertical Termination
VENTING INSTALLATION CSDV Series Direct Vent Gas Stove NOTE: Add 1/4" rise per 1" horizontal length of pipe. Table 4 - Horizontal Venting with Three (3) 90° Figure 23 - Elbows Horizontal Termination Configuration for ST1141 maximum Rigid Venting Using Three (3) 90° Elbows Horiz term 3 elbows Horizontal Vertical minimum... -
Page 20: Flat Ceiling Installation
VENTING INSTALLATION CSDV Series Direct Vent Gas Stove Drop a plumb line from the inside of the roof to the locat- . Assemble the desired lengths of pipe and elbows nec- ing hole in the ceiling. Mark the center point where the essary to reach from the burner system flue up through vent will penetrate the roof. - Page 21 VENTING INSTALLATION CSDV Series Direct Vent Gas Stove VERTICAL TERmINATION CONFIGURA- Cathedral Ceiling TIONS Support Box Figures 9 through 31 show four different configurations for vertical termination. ImpORTANT: Install restrictor as indicated on chart (Figure " Minimum Below Finished 13) on Page 14. Ceiling Cut Hole 1/8"...
- Page 22 VENTING INSTALLATION CSDV Series Direct Vent Gas Stove NOTE: Vertical (V) + Vertical (V ) = 0' (6 m) Maximum Vertical Venting (V) N O T E : I n s t a l l = 40' (1 m) restrictor into 4" Maximum collar of stove or first vent section...
-
Page 23: Stove Installation
STOVE INSTALLATION CSDV Series Direct Vent Gas Stove CHECK GAS TypE Use proper gas type for the fireplace you are installing. If you have conflicting gas type, do not install fireplace. See dealer where you purchased the fireplace for proper fireplace according to your gas type. - Page 24 STOVE INSTALLATION CSDV Series Direct Vent Gas Stove A manual shutoff valve must be installed Only persons licensed to work with gas upstream of the appliance. Union tee piping may make the necessary gas and plugged 1/8" NpT pressure tapping connections to this appliance.
-
Page 25: Checking Gas Pressure
CHECKING GAS pRESSURE and ELECTRICAL INSTALLATION CSDV Series Direct Vent Gas Stove 1. Check gas type. The gas supply must be the same as stated on the appliance’s rating decal. If the gas supply is different from the fireplace, STOp! Do not install the appliance. -
Page 26: Electrical Installation
ELECTRICAL INSTALLATION CSDV Series Direct Vent Gas Stove REmOTE WALL mOUNTED SWITCH A remote wall switch and up to fifteen (15) feet of 18 Ga. wire may be used with this appliance. Attach the wall switch in a junction box at the desired location on the wall. Figure 35. Do not extend beyond the wall switch wire length provided. -
Page 27: Log Placement
LOG pLACEmENT CSDV Series Direct Vent Gas Stove Before you begin — This unit is supplied with ceramic fiber logs. Do not handle these logs with your bare hands. Always wear gloves to prevent skin irritation from ceramic fibers. After handling the logs, wash your hands gently with soap and water to remove any traces of fibers. - Page 28 LOG pLACEmENT CSDV Series Direct Vent Gas Stove pLACE CSDV30 LOGS IN FIREBOx pLACE LOGS AND ROCK WOOL Figure 38 (EmBER mATERIAL) IN FIREBOx 1. Carefully remove logs from wrapping. Break up rock wool (ember material) into dime-sized . Open front door of firebox. pieces.
- Page 29 LOG pLACEmENT CSDV Series Direct Vent Gas Stove pLACE ROCK WOOL (EmBER mATERIAL) pLACE CSDV40 LOGS IN FIREBOx IN FIREBOx Figure 40 1. Carefully remove logs from wrapping. Break up rock wool (ember material) into dime-sized . Open front door of firebox. pieces.
-
Page 30: Operating Instructions
OpERATING INSTRUCTIONS CSDV Series Direct Vent Gas Stove FOR yOUR SAFETy READ BEFORE LIGHTING If you do not follow these instruction exactly, a fire or explosion may result causing property damage, personal injury or loss of life. A. This appliance is equipped with a pilot which must be lit by hand while following these instructions exactly. -
Page 31: Lighting Pilot For The First Time
OpERATING INSTRUCTIONS CSDV Series Direct Vent Gas Stove LIGHTING pILOT FOR THE FIRST TImE INITIAL LIGHTING If using a soap and water solutiong Purge air from the supply line as follows: to test for leaks, DO NOT spray • Open main shutoff valve. solution onto control body. -
Page 32: Lighting Burner
OpERATING INSTRUCTIONS CSDV Series Direct Vent Gas Stove LIGHTING BURNER mAIN BURNER SWITCH The “ON/OFF” switch for the main burner can be found on the back right side of the stove. This switch allows you to turn on and to turn off the main burner without using the gas valve knob. -
Page 33: Air Shutter Adjustment (Natural Gas Only)
AIR SHUTTER ADjUSTmENT (NATURAL GAS ONLy) CSDV Series Direct Vent Gas Stove ADjUSTING THE AIR SHUTTER The venturi of the burner is equipped with an air shutter. The opening of the venturi has been set at 1/4" for Natural Gas and fully open for Propane installation at sea level. Natural Gas Models may be adjusted for high altitude as follows: •... -
Page 34: Cleaning And Maintenance
CLEANING and mAINTENANCE CSDV Series Direct Vent Gas Stove Make sure the gas valve knob is in the “OFF” position. Wait at least five (5) minutes before start-ing maintenance. Allow glass to cool before cleaning. VENTING SySTEm Do not clean glass when it is hot. A qualified agency should examine the venting system Damage could occur. -
Page 35: Glass Replacement
5. Wrap new glass pane with tadpole gasket. Make sure you have 1/4" overlap on each side. 6. Place new glass in frame. 7. Slide glass frame back down onto stove and fasten two clamps. Figure 52 NOTE: Use only original mHSC replacement parts. Gasket Glass ST1153 Glass... -
Page 36: Troubleshooting
TROUBLESHOOTING CSDV Series Direct Vent Gas Stove Turn appliance OFF and allow to cool before servicing. Only a qualified service person should service and repair the heater. NOTE: All troubleshooting items are listed in order of operation. REmEDy OBSERVED pROBLEm pOSSIBLE CAUSE 1. -
Page 37: Replacement Parts
REpLACEmENT pARTS CSDV Series Direct Vent Gas Stove CSDV20 Replacement parts 20 586056 CSDV20 parts 58D6056... - Page 38 REpLACEmENT pARTS CSDV Series Direct Vent Gas Stove Ref. Description qty. CSDV20NV CSDV20pV Burner Assembly 58D050 58D050 Log Support Bracket 58D010 58D010 Pilot Assembly 37D0018 37D0019 SIT 80 Nova Valve 37D0117 37D0118 Injector 6D3006 0H3146 Venturi 45D0600 45D0600 Valve Tube 58D0163 58D0163 ON/OFF Rocker Switch...
-
Page 39: Csdv30
REpLACEmENT pARTS CSDV Series Direct Vent Gas Stove CSDV30 Replacement parts 20 586056 CSDV30 parts 58D6056... - Page 40 REpLACEmENT pARTS CSDV Series Direct Vent Gas Stove Ref. Description qty. CSDV30NV CSDV30pV Burner Assembly 58D0150 58D0150 Log Support Bracket 58D004 58D004 Pilot Assembly 37D0018 37D0019 SIT 80 Nova Valve 37D0117 37D0118 Injector 58D010 0H3144 Venturi 45D0600 45D0600 Valve Tube...
-
Page 41: Csdv40
REpLACEmENT pARTS CSDV Series Direct Vent Gas Stove CSDV40 Replacement parts 586056 CSDV40 parts 58D6056... - Page 42 REpLACEmENT pARTS CSDV Series Direct Vent Gas Stove Ref. Description qty. CSDV40NV CSDV40pV Burner Assembly 58D0368 58D0368 Rear Burner Assembly 58D036 58D036 Log Support Bracket 58D0310 58D0310 Pilot Assembly 0H048 0H048 SIT 80 Nova Valve 37D0117 37D0118 Front Injector 0H3150 0H3151 Rear Injector 6D3006...
-
Page 43: Massachusetts Residents Only
CSDV Series Direct Vent Gas Stove massachusetts Residents Only — please read and follow these special requirements NOTE REGARDING VENTED pRODUCTS . Approved Carbon monoxide Detectors. Each carbon This product must be installed by a licensed plumber or gas fitter monoxide detector as required in accordance with the above when installed within the Commonwealth of Massachusetts. -
Page 44: Warranty
LImITED LIFETImE WARRANTy pOLICy CSDV Series Direct Vent Gas Stove MHSC warrants its products to be free of defects in material and workmanship and backs each product with a Limited Lifetime Warranty. This warranty is to the original purchaser of a MHSC product and is not transferable. - Page 45 149 Cleveland Drive • Paris, Kentucky 40361 www.mhsc.com...
Need help?
Do you have a question about the CSDV30PV and is the answer not in the manual?
Questions and answers