Lorex QLR1660 Instruction Manual page 30

QLR1660 User Manual
▪ Filtering: Setup the network filtering. You can appoint IP address that will be denied connection. Also, within the IP
address range, you can appoint specific IP addresses to accept.
[NOTE]
* When use the Internet Gateway (IP Sharer), you should set below;
1) QLR1660 Server Computer Setting: The Internet Protocol (TCP/IP) Settings of your Computer should be set to 'Use
2) Internet Gateway (IP Sharer) Setting: You should set Virtual Server Setting required for QLR1660 Server in your
3) Firewall Setting: Port Numbers for Video and Audio and P/T/Z camera and Remote Search -2000, 2001, 2002, 2003 –
have to be opened to permit Client and Search connection via external network.
* For the detail contents of 2) and 3) sections, refer to your IP Sharer and Firewall manuals.
the Static IP' because this Computer is used as the Virtual Server for
QLR1660.
Internet Gateway (IP Sharer).
=> Port Numbers for Video and Audio and P/T/Z camera and Remote Search of
QLR1660 Server will be each fixed -2000, 2001, 2002, 2003- as the video port
number (2000) inputted. These Ports must be opened to permit Client and
Search connection via external network.
30
- Denied IP address:
Input the IP address that will be denied.
- Accepted IP address in denied:
Input the IP address that you wish to be
exempted from the denied IP range.
You can control the network connection to the
QLR1660 Server efficiently by filtering IP
address.