Related Manuals for Jung JKB 2 K
Summary of Contents for Jung JKB 2 K
- Page 1 BETRIEBSANLEITUNG OPERATING INSTRUCTIONS KREISEL- UND SERVO- FAHRWERKE REVOLVING TRANSPORT AND MULTI-PURPOSE TROLLEYS...
- Page 2 Notizen / Notes / Notas / Notes / Note / Aantekeningen...
-
Page 3: Table Of Contents
4.3 Selection of the suitable trolley 4.4 Commissioning 4.4.1 Loading the trolleys 4.4.2 Transport 4.4.3 Unloading 5. Care and maintenance 5.1 Greasing the bearings 5.2 Repair 6. Warranty 7. Declaration of incorporation © JUNG Hebe- und Transporttechnik GmbH - 27 -... -
Page 4: Description
The manufacturer / supplier shall not be liable for damage resulting from any other use. The risk is borne by the user in case of non-compliance with the proper use. - 28 - © JUNG Hebe- und Transporttechnik GmbH... -
Page 5: Means Of Representation
• There must not be any objects under the transport load. • Communication must be ensured between all persons involved in the lifting and transport procedure, particularly if eye contact between these persons is interrupted. © JUNG Hebe- und Transporttechnik GmbH - 29 -... -
Page 6: Technical Data
JLF 5 Height Height Weight Weight Load 3 500 Load 5 000 *Due to technical changes, there may be tolerances of up to + 4.5 mm in the installation height since 2014. - 30 - © JUNG Hebe- und Transporttechnik GmbH... -
Page 7: Overview
JKB revolving transport trolleys / JLF multi-purpose trolleys 3. Overview 3.1 JKB revolving transport trolleys JKB 2 K Item number Designation Support plate Locking screw Bolt © JUNG Hebe- und Transporttechnik GmbH - 31 -... - Page 8 JKB revolving transport trolleys / JLF multi-purpose trolleys JKB 4 K Item number Designation Support plate Locking screw Bolt Recess for lashing belts Handle - 32 - © JUNG Hebe- und Transporttechnik GmbH...
- Page 9 JKB revolving transport trolleys / JLF multi-purpose trolleys JKB 6 K Item number Designation Support plate Locking screw Bolt Recess for lashing belts Handle © JUNG Hebe- und Transporttechnik GmbH - 33 -...
- Page 10 JKB revolving transport trolleys / JLF multi-purpose trolleys JKB 8 K Item number Designation Support plate Locking screw Bolt Recess for lashing belts Handle - 34 - © JUNG Hebe- und Transporttechnik GmbH...
- Page 11 JKB revolving transport trolleys / JLF multi-purpose trolleys JKB 10 G Item number Designation Support plate Bolt Handle © JUNG Hebe- und Transporttechnik GmbH - 35 -...
- Page 12 JKB revolving transport trolleys / JLF multi-purpose trolleys JKB 14 G Item number Designation Support plate Bolt Handle - 36 - © JUNG Hebe- und Transporttechnik GmbH...
-
Page 13: Jlf Multi-Purpose Trolleys
JKB revolving transport trolleys / JLF multi-purpose trolleys 3.2 JLF multi-purpose trolleys JLF 3,5 Item number Designation Locking screw Bolt Turntable © JUNG Hebe- und Transporttechnik GmbH - 37 -... - Page 14 JKB revolving transport trolleys / JLF multi-purpose trolleys JLF 5 Item number Designation Locking screw Bolt Turntable - 38 - © JUNG Hebe- und Transporttechnik GmbH...
-
Page 15: Operation
For this purpose, the centre of gravity must be determined in advance. > For the determination of the centre of gravity by means of JUNG jacks, the pressure gauge for jacks (order no. 94 001 024-B) is necessary as an additional accessory. - Page 16 Calculation of the centre of gravity on the complicated case (example 2) 1 mm ≤ 1500 mm Example: Side (1) Pressure = 230 bar Side (2) Pressure = 70 bar - 40 - © JUNG Hebe- und Transporttechnik GmbH...
- Page 17 Before lifting the load, the lifting side, the axis of rotati- on and the exact lifting position must be determined. Top view, example 1 ideal case © JUNG Hebe- und Transporttechnik GmbH - 41 -...
- Page 18 (the edge opposite the jack). Unstable transport loads include "loo- sely" connected objects (such as screw or rivet constructions), as well as loads containing liquids. Top lifting side - 42 - © JUNG Hebe- und Transporttechnik GmbH...
-
Page 19: Optional Accessories
The transported load will tip over uncontrollably. > Push the connecting rod in between and secure this There is a danger of injury. to the trolleys. © JUNG Hebe- und Transporttechnik GmbH - 43 -... -
Page 20: Selection Of The Suitable Trolley
The used transport trolley is at full > Connect the towing bar (3), (4) or (5) to the bolt capacity with 6 000 kg each (safety factor 1.5). on the trolley. - 44 - © JUNG Hebe- und Transporttechnik GmbH... - Page 21 3 times. Solution: As a suitable trolley, 2 JKB 6es with a permissible load capacity of 6000 kg for each trolley cassette is used. © JUNG Hebe- und Transporttechnik GmbH - 45 -...
-
Page 22: Commissioning
Always determine the centre of gravity before using JUNG trolleys. NOTE For the determination of the centre of gravity, see For safe lifting, the use of hydraulic JUNG jacks is "Centre of gravity determination and positioning of recommended. transport trolley and jack", page 39. -
Page 23: Loading The Trolleys
Load the turntable only centrally in the area of the ball bearing. > Connect two identical trolleys with the connecting rod and move the transport trolleys under the load to be transported. > Adjust and lock the connecting rod. © JUNG Hebe- und Transporttechnik GmbH - 47 -... -
Page 24: Transport
It is imperative that the revolving transport trolleys also be steered at the rear side of the load, since the trans- ported load can break out as a result of uneven floors. - 48 - © JUNG Hebe- und Transporttechnik GmbH... -
Page 25: Care And Maintenance
> Grease the bearings of the trolley at least once a occur. year. 5.2 Repair Necessary repairs are carried out by JUNG according to a cost estimate, at short notice and at a reasonable price. Contact details can be found on the back of the operating instructions. -
Page 26: Declaration Of Incorporation
Equipment types: Type: JKB 2 K; JKB 4 K; JKB 6 K; JKB 8 K; JKB 10 G; JKB 14 G; JLF 3,5; JLF 5 Applying the directives of the EC Council: 2006/42/EC We herewith declare that the design of the revolving transport and multi-purpose trolleys, as named above, made by JUNG, is intended to be connected with other machines to form one machine. - Page 27 Notizen / Notes / Notas / Notes / Note / Aantekeningen...
- Page 28 Beratung, Service und Verkauf: Consulting, sales and service: Unser Logo und der Name JUNG sind in der EU, in den USA Our logo and brand name „JUNG“ are registered as trade- und in China unter folgenden Nummern geschützt: marks in the EU, US and China with register numbers: EU: Logo Nr.
Need help?
Do you have a question about the JKB 2 K and is the answer not in the manual?
Questions and answers