On-Screen Input Keypad; Introducing On-Screen Input Keypad; Using On-Screen Input Keypad - LiteOn DD-A300G User Manual

On-Screen Input Keypad

Before you start...
• Make sure the video signal of this DVD recorder is
correctly displayed on your TV screen.
Connecting up Your DVD Recorder (p.11)
• Make sure the remote control works.
Introducing On-Screen Input
Keypad
On-screen input keypad offers you a simple way to enter
file names. Entering your desired characters can be easily
done by pressing the  and ENTER buttons on
your remote control.
EasyAccess_OnScreenInput_01_01
Area for entering title names.
Input option of uppercase or lowercase letters. Press
to switch between two sets of characters.
Input option of numbers, signs and punctuation marks.
Input option of accented letters.
Corresponding buttons on remote control. Press one
of the buttons to quickly move to the column where
your desired characters, symbols or function buttons
are situated.
For example, press '3' once, the highlighted cursor
will move to the letter 'D' on screen. Press '3' twice,
the cursor will move to the letter 'E'.
Available characters or symbols.
Back: to delete characters one by one in a backward
direction.
Clear: to delete all characters shown on the entry bar.
Cancel: to discard changes and returning to the
previous page.
Finish: to saving the settings and exiting the screen.

Using On-Screen Input Keypad

Naming a New Title or File
1. When the keypad screen is displayed, press 
and ENTER to select one of the input options.
2. Press  to select desired letters, numbers or
punctuation marks, then press ENTER.
You can enter up to 30 characters for a title name.
3. Use 'Back' to delete character by character in a back-
ward direction. Use 'Clear' to delete all the characters
you have entered. When completed, press ENTER.
4. When completed, press  to select 'Finish',
then press ENTER.
The entry bar CANNOT be left blank. If such a

condition occurs, you will not be able to exit the
keypad screen. Please follow the instruction given in
the pop-up dialogue box, and go back to complete the
process.
..........................................................................................
Renaming a Title or File
1. In the case of renaming, when the keypad screen is
displayed, the 'Clear' button will be automatically
highlighted. Press ENTER to clear the entry bar, or
press  to select 'Back'; and delete the old title
name character by character.
2. Follow step 1-2 in 'Naming a New Title or File' to
enter a new name for a title or file.
27