82.Xx Waste Toner Bottle Nearly Full; 84 Unsupported [Color] Photoconductor; 84.Xx [Color] Photoconductor Missing; 84.Xx [Color] Photoconductor Nearly Low - Lexmark X952DTE User Manual

Troubleshooting

82.xx Waste toner bottle nearly full

Order a replacement waste toner bottle immediately.
1
Replace the waste toner bottle.
For instructions on installing the waste toner bottle, from the printer control panel touch More Information.
2
Touch Continue to clear the message and continue printing.

84 unsupported [color] photoconductor

Remove the specified photoconductor, and then install a supported one.

84.xx [color] photoconductor missing

Install the specified color photoconductor, following the instruction sheet that came with the replacement part.

84.xx [color] photoconductor nearly low

1
Order a replacement photoconductor.
2
When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the
replacement part.
3
Touch Continue to clear the message and continue printing.

84.xx [color] photoconductor low

1
Order a replacement photoconductor immediately.
2
When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the
replacement part.
3
Touch Continue to clear the message and continue printing.

83.xx Transfer module missing

Insert the transfer module into the printer.

84.xx Replace [color] photoconductor

1
Replace the photoconductor, following the instruction sheet that came with the replacement part.
2
From the printer control panel, touch Continue to clear the message and continue printing.

88.2x Replace [color] cartridge

The specified toner cartridge is empty.
1
Replace the specified toner cartridge.
2
Touch Continue to clear the message and continue printing.
311