Table of Contents
Advertisement
Available languages
Available languages
SETTING THE SLEEP TIMER
CARE AND MAINTENANCE
UPA,
~OWN7
2
u
The receiver
can be automatically
turned off at a specified
time.
1 Press the AIWA RECEIVER
button.
2 Press the SLEEP button.
The unit will be turned
off after about 60 minutes.
To specify the time until the power is turned off
Press the UPA
or DOWNY
button on the main unit repeatedly
within four seconds
after step 2.
Each time the button
is pressed,
the time changes
between
5
and 240 minutes
in 5-minute
steps.
Specified time
To check the time remaining until the power is turned off
Press the SLEEP
button once. The remaining
time is displayed
for four seconds.
To cancel the sleep timer
Press the SLEEP
button twice so that "SLEEP
on the display
disappears.
The UP FH
or DOWN K
button on the remote control cannot
be used to specify the time until the power is turned off. Use the
buttons
on the main unit.
Occasional
care
and
maintenance
of the unit is needed
to
optimize
the performance
of your unit,
To clean the cabinet
Use a soft dry cloth.
If the surfaces
are extremely
dirty,
use a soft cloth
lightly
moistened
with
mild
detergent
solution.
Do not use strong
solvents,
such as alcohol,
benzine
or thinner
as these
could
damage
the finish of the unit.
I 7
ENGLISH
Hide quick links:
Advertisement
Table of Contents
