Page 1
User Manual Adjusting Device for Installation of HD-Lock Striking Plate – Ord. No. 102935.0...
Page 2
Adjusting Device for HD -Lock Striking Plate 102935.0 User Manual User Manual General ....................... 3 Construction ....................3 Adjustment of Striking Plate ..............4 Every precaution has been taken to ensure that the information concerning Disclaimer of Liability hardware and software explained in this document is accurate and correct.
Page 3
Adjusting Device for HD-Lock Striking Plate 102935.0 User Manual 1 General The adjusting device is used for correct alignment of the striking plate of the locking device HD-Lock (Ord. No.: 102000.12/.2 as well as HD-Lock of all series which are refitted with 102930.0). By using the adjustment device, it can be ensure that the bolt of the HD-Lock extend centrally into the recess of the striking plate when it is engaged.
Page 4
Adjusting Device for HD -Lock Striking Plate 102935.0 User Manual 3 Adjustment of Striking Plate To be able to align the striking plate using the adjusting device, it must first be placed with the base plate and the insulating layer in the recess of the door leaf. The screws must be fastened but not yet tightened.
Page 5
Adjusting Device for HD-Lock Striking Plate 102935.0 User Manual After removing the adjusting device, it is necessary to check the functionality and free movement of the HD-Lock bolt considering the following steps: • Close the door (bolt must be engaged).
Need help?
Do you have a question about the 102935.0 and is the answer not in the manual?
Questions and answers