Related Manuals for Mitsubishi Electric Mr. SLIM PLA-M EA-A Series
Summary of Contents for Mitsubishi Electric Mr. SLIM PLA-M EA-A Series
- Page 1 Air-Conditioners Indoor unit PLA-M•EA-A Series OPERATION MANUAL FOR USER English For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.
-
Page 2: Table Of Contents
Contents 1. Safety Precautions ....... . .2 5. Emergency Operation for Wireless Remote-controller ..13 2. -
Page 3: Parts Names
2. Parts Names ■ Indoor Unit PLA-M·EA Filter Air outlet Fan steps 4 steps Vane Auto with swing Louver – Filter Long-life Filter cleaning indication 2,500 hr Vane Air intake Enter the model setting number for the indoor unit you want to operate.* ■... - Page 4 2. Parts Names Display The main display can be displayed in two different modes: “Full” and “Basic”. The factory setting is “Full”. To switch to the “Basic” mode, change the setting on the Main display setting. (Refer to operation manual included with remote controller.) <Full mode>...
- Page 5 2. Parts Names ■ Wireless Remote-Controller Transmission area Not available Remote controller display Battery replacement indicator Set Temperature buttons OFF/ON button Mode button (Changes operation mode) Fan Speed button (Changes fan speed) Airfl ow button (Changes up/down airfl ow direction) i-see button Timer ON button Menu button...
-
Page 6: Battery Installation/Replacement
2. Parts Names Notes (Only for wireless remote controller): Battery installation/replacement ■ When using the wireless remote controller, point it towards the receiver on the indoor unit. ■ If the remote controller is operated within approximately 2 minutes after power is supplied to the 1. -
Page 7: Operation
3. Operation ■ About the operation method, refer to the operation manual that comes with each remote controller. 3.1. Turning ON/OFF [ON] [OFF] Press the [ON/OFF] button. Press the [ON/OFF] button again. The ON/OFF lamp will light up in green, The ON/OFF lamp will come off, and and the operation will start. -
Page 8: Fan Speed Setting
3. Operation 3.4. Fan speed setting <Saving the settings> Select the desired item, and press OU silent mode the [SELECT] button. Tue Wed Thu Fri Sat Sun Start Stop Silent Room Cool Set temp. The screen to set the selected item will appear. - Page 9 3. Operation <Returning to the Main menu> Press the [RETURN] button to go Main Main menu back to the Main menu. Vane·Louver·Vent. (Lossnay) High power Timer Weekly timer OU silent mode Main display: Cursor Page Air outlet identifi cation marks ■...
- Page 10 3. Operation 4 The current vane setting will appear. 3 Setting the vane angle (Fig. 3) Manual vane angle Press the buttons to select the Select the desired outlets from vane angle B. 1 through 4 with the [F1] or [F2] Point the wireless remote controller button.
-
Page 11: Air Distribution
3. Operation 3.6. 3D i-see Sensor setting 2 Select the menu with the [F4] but- Air distribution ton. Note: Ref. address Unit No. Default → Area → Direct/Indirect This function cannot be set depending on the outdoor unit to be Auto vane →... -
Page 12: Energy Saving Option
3. Operation 3.6.3 Energy saving option 3.6.4 Seasonal airfl ow function 1 Select the desired menu with the 1 Select the setting with the [F4] Energy saving option Seasonal airflow [F1] or [F2] button. No occupancy energy save Seasonal airflow button. -
Page 13: Timer
4. Timer ■ Timer functions are different by each remote controller. ■ For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller. Weekly schedule (Wireless remote controller) ■ The weekly schedule can be set to four operation patterns for each day of the week. The settings include the on and off times and the set temperature. -
Page 14: Care And Cleaning
6. Care and Cleaning ■ ■ Filter information Filter information will appear on the Main display When the is displayed on the in the Full mode when it is time to Main display in the Full mode, the Room Room clean the fi... -
Page 15: Trouble Shooting
7. Trouble Shooting Having trouble? Here is the solution. (Unit is operating normally.) Air conditioner does not cool well. ■ Clean the fi lter. (Airfl ow is reduced when the fi lter is dirty or clogged.) ■ Check the temperature adjustment and adjust the set temperature. ■... -
Page 16: Specifi Cations
7. Trouble Shooting Having trouble? Here is the solution. (Unit is operating normally.) ■ Noise is louder than specifi cations. The indoor operation sound level is affected by the acoustics of the particular room as shown in the following table and will be higher than the noise specifi... - Page 17 This product is designed and intended for use in the residential, This product is designed and intended for use in the residential, commercial and light-industrial environment. commercial and light-industrial environment. Please be sure to put the contact address/telephone number on this manual before handing it to the customer.
Need help?
Do you have a question about the Mr. SLIM PLA-M EA-A Series and is the answer not in the manual?
Questions and answers