Provide Adequate Gas Supply - LG LRG30355 Installation Instructions Manual

I N S TA L L AT I O N I N S T RU C T I O N S
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS

1. PROVIDE ADEQUATE GAS SUPPLY

Your range is designed to operate at a
pressure of 5" of water column on natural
gas or, if designed for LP gas (propane or
butane), 10" of water column.
Make sure you are supplying your range with the
type of gas for which it is designed.
This range is convertible for use on natural or
propane gas. If you decide to use this range on
LP gas, conversion must be made by a qualified
LP installer before attempting to operate the
range on that gas.
For proper operation, the pressure of natural gas
supplied to the regulator must be between 5"
and 13" of water column.
For LP gas, the pressure supplied must be
6
between 10" and 13" of water column.
When checking for proper operation of the
regulator, the inlet pressure must be at least 1"
greater than the operating (manifold) pressure
as given above.
The pressure regulator located at the inlet of the
range manifold must remain in the supply line
regardless of whether natural or LP gas is
being used.
A flexible metal appliance connector used to
connect the range to the gas supply line should
have an I.D. of 1/2" and be 5 feet in length for
ease of installation. In Canada, flexible
connectors must be single wall metal
connectors no longer than 6 feet in length.