LeapFrog MAGIC ADVENTURES BINOCULAR CAMERA 618603 Instruction Manual page 17

Double vision
or overlapping
images while
looking through
the binoculars
The device
stopped working
Screen is not
working correctly
Night Vision mode
cannot be used
Camera mode
/ Night Vision
mode (without
microSD card
inserted) - save
failed when
taking photos
Adjust the IPD (interpupillary distance) by moving the 2
Binoculars Barrels closer together or further apart until
a single, merged image is seen.
(1) Press and hold the Power Button for more than 10
seconds.
(2) Release the Power Button and the device will
power back on again. It should now work properly.
(3) If the device does not work, change the batteries and
press the Power Button to turn on the device.
(1) Press and hold the Power Button for more than 10
seconds.
(2) Release the Power Button and the device will
power back on again. It should now work properly.
Replace batteries with new alkaline batteries.
Restart the device by pressing the Power Button and
try again.
(1) Enter the Parent Menu (see the Parent Menu section
for how to access this screen).
(2) Select Option 2 and confirm. Once the process is
finished, it should be okay to take photos while in
Camera mode or Night Vision mode.
(3) If it still isn't working correctly, select Option 3 in the
Parent Menu and confirm.
NOTE: Options 2 and 3 in the Parent Menu will remove
all the saved photos from the internal memory. Please
backup any wanted photos by transferring them to a
microSD card first. After the photo transfer is complete,
remove the microSD card. See the Gallery section for
how to transfer photos to the microSD card.
17