Related Manuals for Richmond TJR010T
Summary of Contents for Richmond TJR010T
- Page 1 Instruction Manual Hydraulic Jack Note: Owner/Operator must read and understand this instruction Manual before using the Jack. RevB：04/2007...
-
Page 2: Table Of Contents
Contents 1. Warning in advance 2. Description 3. Transporting & Storing Storing Transporting 4. Installing 5. Operating Scope of use Method of operating Safety standard 6. Maintaining 7. Add oil 8. Trouble shooting guide 9. List of parts 10.Constructional detail of part... -
Page 3: Warning In Advance
THANK YOU VERY MUCH FOR CHOOSING OUR HYDRAULIC JACK. YOUR SAFETY CORRECT OPERATION, PLEASE CAREFULLY READ THE MANUAL BEFORE USE. NOTE: All of the information reported herein is based on data available at the time of printing. The factory reserves the right to modify its own products at any time without notice or incurring in any sanction. -
Page 4: Transporting & Storing
3. Transporting & Storing 3.1 Storing Keeping the folded jack in dry place. 3.2 Transporting The operating handle (02) is just for operating the jack. When transporting the jack, it can not be dropped or be thrown because it may cause the piston of it damaged, and the pump of it might be spoiled. -
Page 5: Safety Standard
Attention: Can not use the front end of tooth plate to lift the weight. Important point: When lifting the weight by the tooth plate, the weight should be closed to the head of jack to avoid the pillar (47) of jack being bent. -
Page 6: Maintaining
5.3.8 Please guarantee the lifted weight being stable during the whole lifting period to avoid it being turn over or being slipped. Each device shall be fixed before lifting. 5.3.9 Never operating the jack when people standing on the lifting weight. -
Page 7: Add Oil
tightly. The jack's pump without any oil-leaking. The pump body, tooth plate and its base without any cracking or form deformation happening-changing. The pump should be operated normally without loading. 6.1.2 Under the frequent use of the jack, the time of checking shall checking points shall be shortened as well, and following be emphasized:... -
Page 8: Trouble Shooting Guide
8.Trouble shooting guide Items Symptom Possible cause Aliments 1.Screw in the unload handle (16) tightly in Jack can not clockwise direction. The release valve is be pumped up 2.Loose the screw (37) not closed. properly. to release the air from the pump, then screw in it tightly. -
Page 9: List Of Parts
9 .List of parts CODE OF CODE OF NAME NUM NO NAME PART PART 1 Handle Grip 501 501 25 Ball 2 Handle 502 502 26 Spring 3 Snap Ring 503 503 27 Screw 4 Socket 504 504 28 Pump Body 5 Pin 505 505 29 O-Ring... -
Page 10: Constructional Detail Of Part
10.Constructional detail of part...
Need help?
Do you have a question about the TJR010T and is the answer not in the manual?
Questions and answers