System Recovery Procedure - JVC MP-XV841 Instructions Manual

System Recovery Procedure

IMPORTANT: This recovery procedure brings PC to its original state. It
DOESN'T recreate any programs installed by end user neither does it
recreate end user files or settings!
1. Hold down the F10 key and press the Power button to start up your PC.
When message "Do you wish to continue? (Y/N)" appears, respond with Y.
Tips
• If you respond with N, the recovery is canceled. The PC will restart and the Windows OS
will start up.
• If too much time is taken to press the key or a continuous beep is heard for other reasons,
turn off the power, and repeat the process.
• If Windows starts up after a delay, exit Windows, turn off the power, and repeat the process.
2. Read the License Agreement when displayed.
If you accept the Agreement, type Y.
Tips
If you respond with N, the recovery is canceled. The PC will restart and the Windows OS will
start up.
3. Select the recovery method (disk partitioning).
When message "Select the recovery method (A (Recommended)/C)" appears, respond with
the 1 or 2 key as follows.
1 If you respond with A:
All disk partitions on the hard disk are recreated and entire PC is initialized to its original
state.
2 If you respond with C:
The files of drive C are recovered and initialized.
(Usually, all data of drive D remains unaltered, as they are, and only the data of drive C is
initialized. If drive D has already been removed, the PC only has drive C.)
89
EN
Continue to next page